The complete E-Safenet key is:
0xD0, 0xCA, 0x19, 0x8E, 0x9C, 0x92, 0x1E, 0xE9, 0x72, 0xC5, 0x57, 0x1F, 0x54, 0x49, 0x1A, 0xD0,
0x04, 0xA3, 0x55, 0x21, 0xE7, 0xD9, 0xC7, 0xA0, 0x4C, 0x91, 0x5C, 0xDC, 0x6C, 0x27, 0xF3, 0xBA,
0x21, 0x02, 0x89, 0xB6, 0xD8, 0x61, 0x2E, 0x1D, 0x93, 0xC8, 0xAF, 0x3C, 0x59, 0x7D, 0x91, 0x60,
0x9F, 0xBE, 0xA9, 0x6B, 0xF5, 0xE4, 0x68, 0xFA, 0xDC, 0x47, 0xDA, 0x1C, 0x35, 0xED, 0x63, 0x30,
0x06, 0xCD, 0x18, 0x3F, 0xAB, 0xA2, 0x51, 0xC0, 0xDE, 0x89, 0x3D, 0x47, 0xCF, 0x16, 0xB1, 0xA8,
0x4F, 0x2E, 0x28, 0xE2, 0x09, 0x8F, 0x78, 0x60, 0x77, 0x81, 0x6B, 0x13, 0xF9, 0x0D, 0x70, 0xDA,
0x5B, 0xC1, 0xBF, 0x7B, 0xC8, 0xEF, 0x11, 0xAF, 0x8C, 0x1C, 0xE1, 0x9F, 0xA0, 0x0F, 0x2A, 0x76,
0x8B, 0xB9, 0x97, 0x7D, 0xFB, 0x12, 0xC5, 0x7C, 0x7E, 0xBE, 0x54, 0x22, 0xC7, 0xD8, 0xEF, 0x62,
0x27, 0xFA, 0x79, 0x41, 0x87, 0x85, 0xC4, 0xC2, 0x70, 0x5F, 0x15, 0x1E, 0xE8, 0x02, 0x13, 0x3D,
0xD5, 0x3F, 0x78, 0x17, 0x61, 0xEC, 0xF3, 0x91, 0x0C, 0xDB, 0xE3, 0x48, 0x13, 0x9E, 0x8B, 0xA5,
0x74, 0x47, 0x1A, 0xFD, 0xB3, 0x5A, 0x52, 0x20, 0x2A, 0x9E, 0x29, 0xB6, 0x9B, 0xC2, 0x84, 0xD7,
0x16, 0x98, 0x5D, 0x5F, 0xEE, 0x65, 0x33, 0x2E, 0x2B, 0xD5, 0xC8, 0x4E, 0x8F, 0x67, 0x27, 0x7E,
0xB2, 0x9C, 0xE6, 0xDA, 0x61, 0x75, 0x17, 0x66, 0xE5, 0x01, 0x74, 0xE2, 0xFE, 0x8E, 0x7A, 0x0F,
0xD1, 0x4A, 0x6A, 0x9D, 0x69, 0x87, 0x3E, 0x39, 0x21, 0x0C, 0x81, 0x0E, 0x8F, 0x17, 0x78, 0xE4,
0xC7, 0x67, 0xB8, 0x75, 0x34, 0x8F, 0x00, 0x3E, 0x72, 0x3A, 0x3F, 0x16, 0x1E, 0x47, 0x8A, 0xF6,
0x04, 0xC9, 0x01, 0x76, 0xD9, 0x61, 0x8D, 0x28, 0x07, 0xC9, 0xE7, 0x09, 0x49, 0xB2, 0xEA, 0xBF,
0x14, 0x2E, 0xAD, 0x1D, 0x02, 0xA1, 0x2E, 0xD9, 0x0F, 0x46, 0xE2, 0xE6, 0xCE, 0xD2, 0x84, 0xEB,
0xB3, 0x41, 0x5D, 0xFB, 0xF0, 0x2F, 0xEF, 0x45, 0x01, 0xE4, 0x34, 0x69, 0x35, 0xD4, 0x91, 0x1D,
0xF1, 0x26, 0x39, 0xA9, 0x6E, 0xAF, 0xC7, 0xCA, 0xCC, 0xEC, 0xB7, 0x3A, 0x18, 0x1E, 0xA9, 0xCD,
0xCE, 0x58, 0x28, 0xEC, 0xDD, 0x58, 0x26, 0x2C, 0x8F, 0x65, 0x63, 0x36, 0x63, 0xA4, 0x2B, 0x7D,
0x89, 0x84, 0xD6, 0x15, 0xE6, 0x41, 0x44, 0x8A, 0x23, 0x69, 0x49, 0xE1, 0x3B, 0x60, 0x85, 0x52,
0xF9, 0x41, 0x65, 0x26, 0x7C, 0x10, 0x79, 0x69, 0xAA, 0xFA, 0xCE, 0x0D, 0x21, 0x5C, 0xE6, 0x44,
0x26, 0x37, 0x6C, 0x7A, 0x93, 0xB1, 0x1E, 0x81, 0xA0, 0x32, 0x7B, 0xA7, 0xC3, 0x2F, 0x0C, 0xB4,
0x9F, 0x01, 0x57, 0xA5, 0x3B, 0x3D, 0xE1, 0x44, 0x17, 0xB1, 0x58, 0xA5, 0x8D, 0xBF, 0xAF, 0xB5,
0x0B, 0xC5, 0x3D, 0x8C, 0x65, 0xA2, 0x97, 0xA0, 0x56, 0x60, 0x28, 0x06, 0x70, 0xDC, 0xE8, 0x25,
0x82, 0x1E, 0xD4, 0x61, 0xAC, 0x31, 0x28, 0x96, 0x42, 0x6F, 0x52, 0x6E, 0x0A, 0x23, 0x33, 0xEC,
0x28, 0xC3, 0x75, 0x44, 0x53, 0xED, 0xD3, 0x85, 0x69, 0x3B, 0xEB, 0xC3, 0x4D, 0x38, 0xA1, 0xBB,
0x80, 0xD7, 0xCD, 0x51, 0xF2, 0x15, 0xAB, 0x29, 0x0B, 0x22, 0xEF, 0xCE, 0xED, 0xF8, 0xC1, 0xF7,
0xFC, 0x56, 0xEA, 0x80, 0x73, 0x1A, 0x18, 0xFD, 0x5D, 0x37, 0x6F, 0x38, 0x70, 0xAB, 0x64, 0xC5,
0x35, 0xBD, 0x52, 0xD5, 0xEF, 0xFA, 0xB7, 0x43, 0xFF, 0xA8, 0x7A, 0x75, 0x59, 0x38, 0x87, 0x53,
0xB6, 0x50, 0xD8, 0xEB, 0xB9, 0x0E, 0xA3, 0x6B, 0x70, 0x58, 0x47, 0xEB, 0x42, 0xFE, 0x05, 0xBC,
0x1F, 0xA3, 0xE8, 0x75, 0x61, 0x96, 0xC4, 0xC1, 0x68, 0x22, 0x60, 0xA5, 0xB3, 0x7B, 0x3F, 0x8F
The last part of the release notes is:
easure
- Fixed the bug of information display
[History]
-------------
v00.04.04.01.01 2016/09/14
- Supported the multi-inteface of LXI
- Fixed bugs about Measure
v00.04.04.00.07 2016/07/19
- Added the full-screen display in the XY mode
- Modified the Trace data of average sample mode
- Fixed the bug of system halted for wve persistance in the Zoom mode
- Fixed bugs about Measure
v00.04.03.02.03 2015/10/20
- Added commands concerning the type and format of the image
- Added four measurement items (+Pulses, -Pulses, +Edges, -Edges) and
relate commands
- Added commands concerning the digital filter
- Added more information to the last setting
- Fixed option installation
- Fixed Intg operation
v00.04.03.01.05 2015/06/16
- Added French in system language
- Added the mutual communication with DG4000 Series
- Added the digital filter
- Supported using memory data to carry out FFT operation
- Supported invert and format setting when reading a image remotely
- Fixed bugs when the dta of the digital channel is saved in the CSV
format
v00.04.03.00.01 2015/05/05
- Added DS1104Z Plus and DS1074Z Plus
- Fixed pass/fail test
- Fixed FFT operation
v00.04.02.04.07 2014/12/31
- Fixed triggering fuction
- Fixed storage function
- Fixed bugs of jitter in the signal under the AC or low-frequency
coupling
v00.04.02.03.00 2014/10/21
- Added commands concerning remote reading and download of pass/fail test
rules
- Improved the command set for decoding and waveform recording
- Fixed bugs in RS232 decoding
v00.04.01.02.00 2014/07/28
- Added traditional Chinese language for the measurement menu
- Optimized the event table display
- Pressed and held [Measure] to remove all the measurement items
- Added hardware version number to the displayed system information
- Fixed bugs in storage function
- Fixed bugs in the Undo operation for AUTO
- Fixed bugs i signal source function
v00.04.00.00.00 2014/03/18
- Added remote reading of LA waveform data
- Added commands concerning the measurement of MATH waveform
- Optimized the prompt message of LA probe calibration
- Fixed bugsin triggering function
v00.02.03.05.00 2014/01/27
- Added the command set for the keypad
- Added multiple system languages
- Optimize the prompt message of LA probe calibration
- Fixed bugs in frequency counter
- Fixedbugs in storage
- Fixed the crash problem when formatting U disk in NTFS format
v00.02.01.01.00 2013/10/31
- Added measurement history function
- Added the setting for measurement range
- Adjusted the priority order of the emote interface
- Realized the seamless integration of digital oscilloscope and the signal
generator
- Optimized trigger state display
- Fixed bugs in horizontal scale
v00.02.00.01.00 2013/09/02
- Optimized the brighness of waveform display
- Optimized the waiting time for the slow sweep mode
v00.01.00.16.09 2013/08/14
- Supported the remote access to memory data
v00.01.00.13.09 2013/ 07/ 25
- Added the export function of deep memory wavform data
- Added the delay calibration function for the channel
- Optimized the persistence time of waveform display
- Fixed bugs in slow sweep
v00.01.00.12.08 2013/07/10
- Optimized the USB Device interface communication
- Fixed bugs in print function
- Modified the abnormal trigger level line after the AUTO operation
v00.01.00.03.00 2013/05/21
- Fixed bugs for the expiration of the trial options
v00.01.00.02.00 2013/05/19
- Added the isplay interface of the installed option
v00.01.00.00.05 2013/05/19
- Released the first edition
Just have to decompress the 1st 512 bytes (LZO). Now the python guys can easily do it.