Does anyone in Europe received the Flir E4 from the company conrad.de (and web pages Conrad.xx)
Ordered at 11/08 and received my E4 on 11/18 from conrad.de, calibration date 11/13, firmware 1.19.8. They got some stock on 11/14 and dispatched my unit on 11/16.
My package even contains the delivery note from Flir estonia to Conrad, about a batch of 10 E4s, including their serial numbers. I now contacted Conrad about that missing battery, since the web shop (by mistake?) promised that 2 batteries are included by the time I ordered. Now they corrected their article description, but I'm still waiting for an answer
![Cheesy :D](https://www.eevblog.com/forum/Smileys/default/xcheesy.gif.pagespeed.ic.KPzuH4J-TG.png)
Big thanks to Mike and all other contributers, for making it possible that I now own a 320x240 TIC!
Another thing, I noticed a spot on my lens, which I tried to clean with a Q-Tip soaked in some isopropyl alcohol and canned air. The spot is still there but now I have a small circular spot on my thermal images as well
![Sad :(](https://www.eevblog.com/forum/Smileys/default/xsad.gif.pagespeed.ic.L3FGyzQrjB.png)
It's quite hard to see after powering up the E4, but gets more prominent after some time. That circle is shown to be a little warmer than the surrounding environment, except when I point the camera to a hot surface, then it seems to be colder.
Since any dirt on the lens should be out of focus (?), did I somehow manage to move dust or oil droplets inside the housing to the sensor surface by blowing on the lens?