I also succeeded finding codes with wgoeo python script (thanks man!!) and later on MCBD ing for 200MHz and introducing codes for MSO / WIFI / AWG directly on scope interface. They seem to be properly set as when pressing the options => Information menu i can not change they appear as permanent licenses.
BUT... i bought a WIFI TPLINK WN725N, the one advertised to be used. After plugging it I am able to manually scan for the Wifi networks, finding those around without hassle. I am able to connect to a wlan and to manually set an ip or to leave it to DHCP. In both cases the scope returns a wlan connected message and shows the wifi wave icon in the bottom down menu. In the dhcp mode it is assigned a proper IP, according to the range defined in the wlan router (so no random IP, but a logical one).
BUT... unfortunately it is not really working. I cannot access the webpage (that i am capable to do so with a wired LAN connection). If i ping it, no answer at all. If i try to use it to connect to my awg emulated server it is not working either.
Therefore, I don't know if it is TPLINK usb interface (there seems to be several versions out there) despite it properly finds wlan's and says "wlan connected" OR if it is an issue with the codes the python script calculated, requiring an extra step
Reading through the entire pages it seems to happen at least to another user.
Regards