kahuna0k and 41 Guests are viewing this topic.
I lost one of my tools, it's a cheap endoscope camera.The concept I bought it with my hard work money and then I can't put my hands on it simply drive me 100% nuts.Surely hidden in one of those boxes on the floor.Don't know about you, but I can't do anything else until I find the lost one...Matthew 18:10-14 afasdfhlasjhflasjdfhlasjfhlasjdhflasjhfljashdlfkjahsldfkjhasldfjh
Next TE project on bench 1. Anyone care to guess what it is and what is planned?
Time to get out the labeler. mnem
mnem
Quote from: tggzzz on May 31, 2022, 08:21:24 pmQuote from: med6753 on May 31, 2022, 08:07:00 pmThe P-3/CP-140 is based upon the Lockheed Electra commercial airliner which had limited success.iSTR the early Electras had an unfortunate tendency to shed their wings in flight.Not a great handicap when your competition is Viscounts!
Quote from: med6753 on May 31, 2022, 08:07:00 pmThe P-3/CP-140 is based upon the Lockheed Electra commercial airliner which had limited success.iSTR the early Electras had an unfortunate tendency to shed their wings in flight.
The P-3/CP-140 is based upon the Lockheed Electra commercial airliner which had limited success.
Quote from: Vince on May 31, 2022, 12:54:32 amQuote from: hendorog on May 30, 2022, 09:55:08 pmThe EMEX organisers felt very sorry for me having to spend three days in close confinement with tautech in the Siglent booth. So they gave me my own booth!!!Of course being the upstanding gentleman I am, I let him use it....It then begs the question : how did you manage to get the booth of the guy next to you ? Did you kill him ? Did he never show up, he canceled and the organizers let you have his space ?!You got it for free or did you have to pay double ?! Single booth space was a bit small... but double space looks a bit large now.... needs something in between, one and a half booth...Exhibitor next to us was a “no show” so rather than have the booth next to us empty the organisers offered it to us free. The tautech is very pleased and is organizing a 2nd large table and more of his gear to exhibit tomorrow.
Quote from: hendorog on May 30, 2022, 09:55:08 pmThe EMEX organisers felt very sorry for me having to spend three days in close confinement with tautech in the Siglent booth. So they gave me my own booth!!!Of course being the upstanding gentleman I am, I let him use it....It then begs the question : how did you manage to get the booth of the guy next to you ? Did you kill him ? Did he never show up, he canceled and the organizers let you have his space ?!You got it for free or did you have to pay double ?! Single booth space was a bit small... but double space looks a bit large now.... needs something in between, one and a half booth...
The EMEX organisers felt very sorry for me having to spend three days in close confinement with tautech in the Siglent booth. So they gave me my own booth!!!Of course being the upstanding gentleman I am, I let him use it....
Quote from: TERRA Operative on May 31, 2022, 03:32:02 pmCan the front panel not be unscrewed and removed? Or is it captive behind the binding posts etc?Unfortunately captive behind the binding posts.
Can the front panel not be unscrewed and removed? Or is it captive behind the binding posts etc?
On maritime patrol, I can't talk about my work much, but here is one I did 30 years ago. Not submarine but still maritime surveillance.This had the Ferranti Seaspray 2000 search radar. Being pre GPS it had Litton VLF/Omega and inertial navigation equipment. No video either but the Agiflight 70mm film camera had a ARINC 429 datalink to the nav system and minature LEDs that imprinted the LAT/LONG and time on the film. This was important legally. We were a small company (now long gone) and apart from the design building and indstallation I flew on the aircraft for certification and operational testing. Roaring in at 250ft towards a boat seemed to frighten the fishermen a bit
(And no, I can't even be bothered to goole it!)
Quote from: med6753 on June 01, 2022, 12:28:54 amNext TE project on bench 1. Anyone care to guess what it is and what is planned? Is it an AVO meter, and you are going to make it into an attractive table lamp?
Quote from: Robert763 on May 31, 2022, 08:39:35 pmOn maritime patrol, I can't talk about my work much, but here is one I did 30 years ago. Not submarine but still maritime surveillance.This had the Ferranti Seaspray 2000 search radar. Being pre GPS it had Litton VLF/Omega and inertial navigation equipment. No video either but the Agiflight 70mm film camera had a ARINC 429 datalink to the nav system and minature LEDs that imprinted the LAT/LONG and time on the film. This was important legally. We were a small company (now long gone) and apart from the design building and indstallation I flew on the aircraft for certification and operational testing. Roaring in at 250ft towards a boat seemed to frighten the fishermen a bit Looks like Fokker based F-27. Correct? IBM owned at least two license built Fairchild F-27's as executive transports in the 1960's. As well as Lockheed Sabreliners. All painted several shades of blue of course. Prior to the F-27's they owned DC-3's.A local airline (Mohawk Airlines) also flew the F-27.
Quote from: med6753 on June 01, 2022, 12:28:54 amNext TE project on bench 1. Anyone care to guess what it is and what is planned? Tek 465 revival?-Pat
Quote from: mnementh on June 01, 2022, 12:36:39 ammnemArrgh,Those old capacitors were marked with the outer CAN end, but NOT because of noise pickup. It was so you could avoid having high voltage on the can (which often had fairly poor insulation) where it could be a shock / leakage (burning) hazard. At signal and relevant noise frequencies both ends of the capacitor are a the same potential due to the low impedance of the capacitor.
Quote from: Neomys Sapiens on June 01, 2022, 03:09:37 amQuote from: mnementh on June 01, 2022, 01:29:15 amQuote from: Zucca on June 01, 2022, 01:04:27 amQuote from: Zucca on May 24, 2022, 12:47:46 pmI lost one of my tools, it's a cheap endoscope camera... Stupid Zucca put the camera into an old headphone case because it was better than the paper carton box. Stupid Zucca forgot completely about it and he was looking for the old paper box everywhere.It was under my nose the entire freakkking time.I am getting old very fast, please help me. I want to kill myself. Time to get out the labeler. Maybe it would fit him best to mount it onto a rollator right away!... or use stackable transparent boxes + labeling ...
Quote from: mnementh on June 01, 2022, 01:29:15 amQuote from: Zucca on June 01, 2022, 01:04:27 amQuote from: Zucca on May 24, 2022, 12:47:46 pmI lost one of my tools, it's a cheap endoscope camera... Stupid Zucca put the camera into an old headphone case because it was better than the paper carton box. Stupid Zucca forgot completely about it and he was looking for the old paper box everywhere.It was under my nose the entire freakkking time.I am getting old very fast, please help me. I want to kill myself. Time to get out the labeler. Maybe it would fit him best to mount it onto a rollator right away!
Quote from: Zucca on June 01, 2022, 01:04:27 amQuote from: Zucca on May 24, 2022, 12:47:46 pmI lost one of my tools, it's a cheap endoscope camera... Stupid Zucca put the camera into an old headphone case because it was better than the paper carton box. Stupid Zucca forgot completely about it and he was looking for the old paper box everywhere.It was under my nose the entire freakkking time.I am getting old very fast, please help me. I want to kill myself. Time to get out the labeler.
Quote from: Zucca on May 24, 2022, 12:47:46 pmI lost one of my tools, it's a cheap endoscope camera... Stupid Zucca put the camera into an old headphone case because it was better than the paper carton box. Stupid Zucca forgot completely about it and he was looking for the old paper box everywhere.It was under my nose the entire freakkking time.I am getting old very fast, please help me. I want to kill myself.
I lost one of my tools, it's a cheap endoscope camera...
Quote from: Robert763 on June 01, 2022, 06:54:48 amQuote from: mnementh on June 01, 2022, 12:36:39 ammnemArrgh,Those old capacitors were marked with the outer CAN end, but NOT because of noise pickup. It was so you could avoid having high voltage on the can (which often had fairly poor insulation) where it could be a shock / leakage (burning) hazard. At signal and relevant noise frequencies both ends of the capacitor are a the same potential due to the low impedance of the capacitor.So you're suggesting that the only useful information there is Carlson demonstrating that he is in fact a noise antenna...? mnem"More fun & games for the feeble-minded..." ~Old man Basche
Quote from: tggzzz on June 01, 2022, 07:41:41 am(And no, I can't even be bothered to goole it!)https://en.wikipedia.org/wiki/Goole