morris6, EggertEnjoyer123, Peter_O, Glull and 96 Guests are viewing this topic.
Quote from: Specmaster on February 14, 2022, 08:37:03 amI'll reveal the answer to my question later when a few more possible answers have been submitted.....Since the poll was done by the BBC chances are the vast majority of the responders were British. Which means the poll results would obviously be biased towards a British car. Same thing would happen if the poll was done here. Would be biased towards an American car.Whatever the results that type of poll sucks. Edit....my answer. AMC Pacer.
I'll reveal the answer to my question later when a few more possible answers have been submitted.....
Party with vacuum tubes,
Quote from: tautech on February 13, 2022, 09:29:37 pmQuote from: tggzzz on February 13, 2022, 09:23:34 pmThe bes I could manage in my Landie was, when driving along a single track road, to rotate the steering wheel through +-20degrees, without the car deviating. That got the attention of oncoming drivers.Yep the steering drop idlers wear out. Rebushing them is a pretty simple job.The problem is the use of worm gear instead of rack and pinion. Now, worm gear has some strength advantages, which is why a cross-country vehicle would use it, but it definitely is more play-inducing than rack and pinion.
Quote from: tggzzz on February 13, 2022, 09:23:34 pmThe bes I could manage in my Landie was, when driving along a single track road, to rotate the steering wheel through +-20degrees, without the car deviating. That got the attention of oncoming drivers.Yep the steering drop idlers wear out. Rebushing them is a pretty simple job.
The bes I could manage in my Landie was, when driving along a single track road, to rotate the steering wheel through +-20degrees, without the car deviating. That got the attention of oncoming drivers.
Quote from: mansaxel on February 13, 2022, 07:01:20 pmI do not trust myself with driving in the UK.Your ancestors did a miracle!The Dagen H still amaze me today.
I do not trust myself with driving in the UK.
ZSM381 never looked like that in its wildest dreams.List of "creature comforts":-No roof liningFixed seats, with the "seat cushion", a slab of foam rubber in a vinyl cover.Bare metal dash.Bare minimum of instrumentation.One wiper No floor matsBare metal pedals.No door trim.No heater--ventilation was by opening the rectangular vents under the windscreen.Sliding windows.
Quote from: BU508A on February 13, 2022, 06:17:32 pmParty with vacuum tubes,Telefunken Industrial tubes. -- You are sitting on a small fortune. - Not that anyone should ever strip working vintage TE for the tubes. I'm glad it is in safe hands.
Quote from: McBryce on February 13, 2022, 07:37:56 pmQuote from: Cerebus on February 13, 2022, 06:35:10 pmQuote from: McBryce on February 13, 2022, 06:24:14 pmAh, understood. I call that displacement molding. Did it in university, never encountered it again.McBryce.Also called Investment Casting in some industrial circles, a term I found very confusing at first because my mind first went to the financial usage of the word investment and it sounded to me like it was a particularly lucrative casting process.Ah, that's the word I was trying to remember. We actually called it displacement casting, not molding.McBryce.Yebbutt... none of those names specifically refer to the process which uses 3DP, and any means of referencing it using them would be much more convoluted and probably include the term Lost PLA anyways. To "Makers" familiar with 3DP, Lost PLA means the same as Lost PLA Investment Casting would probably mean to you. mnem*toddles off to grill some bits o' pig*
Quote from: Cerebus on February 13, 2022, 06:35:10 pmQuote from: McBryce on February 13, 2022, 06:24:14 pmAh, understood. I call that displacement molding. Did it in university, never encountered it again.McBryce.Also called Investment Casting in some industrial circles, a term I found very confusing at first because my mind first went to the financial usage of the word investment and it sounded to me like it was a particularly lucrative casting process.Ah, that's the word I was trying to remember. We actually called it displacement casting, not molding.McBryce.
Quote from: McBryce on February 13, 2022, 06:24:14 pmAh, understood. I call that displacement molding. Did it in university, never encountered it again.McBryce.Also called Investment Casting in some industrial circles, a term I found very confusing at first because my mind first went to the financial usage of the word investment and it sounded to me like it was a particularly lucrative casting process.
Ah, understood. I call that displacement molding. Did it in university, never encountered it again.McBryce.
Back in the time when people did such things the old way, it was "lost wax" casting.
Quote from: BU508A on February 13, 2022, 06:17:32 pmEchoes from a distant pastPart five - The Rohde & Schwarz vacuum tube millivoltmeter UVN BN 12001(SNIP lots of amazing pics of analog millivolt meter)...I hope, you've enjoyed it. I'll add the schematics and pictures of the specs tomorrow. Thank you for watching!As much as I love that all image-heavy pico-sensitive analog pulchritude... I'm sorry... but my takeaway is...I wanna mug you for that AWG... mnem
Echoes from a distant pastPart five - The Rohde & Schwarz vacuum tube millivoltmeter UVN BN 12001(SNIP lots of amazing pics of analog millivolt meter)...I hope, you've enjoyed it. I'll add the schematics and pictures of the specs tomorrow. Thank you for watching!
Now I know what you've meant.Checked prices on ebay. Audiophoolery at work...
Sometimes I am really very grateful that there is so much water between the dragon and me.
Quote from: med6753 on February 14, 2022, 08:58:37 amQuote from: Specmaster on February 14, 2022, 08:37:03 amI'll reveal the answer to my question later when a few more possible answers have been submitted.....Since the poll was done by the BBC chances are the vast majority of the responders were British. Which means the poll results would obviously be biased towards a British car. Same thing would happen if the poll was done here. Would be biased towards an American car.Whatever the results that type of poll sucks. Edit....my answer. AMC Pacer. wrong, so wrong, that's in illegal response, sir.
Quote from: BU508A on February 14, 2022, 11:57:11 amSometimes I am really very grateful that there is so much water between the dragon and me. The Dragon might be an Appalachian Mountain Dragon, but I don't think he's equipped to handle the Schwarzwald. I think you're pretty safe.
Quote from: Zucca on February 14, 2022, 02:40:48 amQuote from: mansaxel on February 13, 2022, 07:01:20 pmI do not trust myself with driving in the UK.Your ancestors did a miracle!The Dagen H still amaze me today.And then there was the country that learned from that experience, and did it in easy stages - either province by province or by having practice days. Much like "The Two Ronnies" sketch where the gardeners moved the big hole from one end of the garden to the other in easy stages.
There was the old joke that Ireland was planning to change to LHD too. To make things easier they decided that trucks and buses would swap on the 1st of January and if all went well, passenger cars would swap over from the 1st of February. McBryce.
31181
Quote from: Specmaster on February 14, 2022, 09:43:39 amQuote from: med6753 on February 14, 2022, 08:58:37 amQuote from: Specmaster on February 14, 2022, 08:37:03 amI'll reveal the answer to my question later when a few more possible answers have been submitted.....Since the poll was done by the BBC chances are the vast majority of the responders were British. Which means the poll results would obviously be biased towards a British car. Same thing would happen if the poll was done here. Would be biased towards an American car.Whatever the results that type of poll sucks. Edit....my answer. AMC Pacer. wrong, so wrong, that's in illegal response, sir.I know... I think my brain just suffered a divide-by-zero segfault; would somebody please reboot it by kicking my wheelie chair...? mnemYes, I actually do know just how much wrong there is in that statement...
Quote from: tggzzz on February 14, 2022, 10:26:24 amQuote from: Zucca on February 14, 2022, 02:40:48 amQuote from: mansaxel on February 13, 2022, 07:01:20 pmI do not trust myself with driving in the UK.Your ancestors did a miracle!The Dagen H still amaze me today.And then there was the country that learned from that experience, and did it in easy stages - either province by province or by having practice days. Much like "The Two Ronnies" sketch where the gardeners moved the big hole from one end of the garden to the other in easy stages.There was the old joke that Ireland was planning to change to LHD too. To make things easier they decided that trucks and buses would swap on the 1st of January and if all went well, passenger cars would swap over from the 1st of February. McBryce.
Quote from: SeanB on February 14, 2022, 09:41:31 am31181One could make 3118ii which, because it must be in at least base j (= 1910), would be much bigger.