I improved the power distribution for my rack.
I showed my new rack recently, especially a new switchable rack power distribution panel (mounted vertically) shown roughly in the middle of the following photo:
![](https://www.eevblog.com/forum/testgear/test-equipment-anonymous-(tea)-group-therapy-thread/?action=dlattach;attach=949766;image)
This rack power distribution panel was ~40€ with decent switches but poorly mounted and crappy IEC-outlets:
![](https://www.eevblog.com/forum/testgear/test-equipment-anonymous-(tea)-group-therapy-thread/?action=dlattach;attach=957838;image)
On one hand the plug-forces were all over the place from practically non-existent to extremely high. With the latter the individual IEC-outlets could be pulled nearly 0,4cm out of their mounting holes. Overall not very promising. Something had to be done.
![Fighting :box:](https://www.eevblog.com/forum/Smileys/default/fighting0030.gif.pagespeed.ce.H3HVtgjLEV.gif)
I ordered eight Schurter brand ones for ~10€ without shipping, improving this panel to a 50€ one.
The following photo shows the crappiness of the original ones and the decent quality of Schurter brand one. A look at the 4,8mm fast on connectors alone reveals the difference:
![](https://www.eevblog.com/forum/testgear/test-equipment-anonymous-(tea)-group-therapy-thread/?action=dlattach;attach=957842;image)
The spring mounting clips of the original crappy ones are inappropriate for being mounted into a housing with 0,8mm thick walls.
![Face Palm :palm:](https://www.eevblog.com/forum/Smileys/default/xfacepalm.gif.pagespeed.ic.EBDwh1hCfo.png)
![](https://www.eevblog.com/forum/testgear/test-equipment-anonymous-(tea)-group-therapy-thread/?action=dlattach;attach=957846;image)
As shown on the photo the Schurter IEC outlets have a mounting clip that works with form closure -this works well even with 0.8mm thick walls being mounted in -the Schurter IEC outlets I ordered a suitable for walls up to 1mm. The wiggle-y-ness of 0.2mm is ok for me with them not coming out like the crappy ones.
Happy now. And safer.
![Smiley :)](https://www.eevblog.com/forum/Smileys/default/xsmiley.gif.pagespeed.ic.R8GFI-pF6f.png)