Hi
I am looking for the following:
E2450 Symbol Download Utility software.
The attached .ZIP file contains the following files:
messages
objects
opt5_032
optc_032
opt_032
readme.txt
messages\default
messages\default\alloc.ini
messages\default\design.ini
messages\default\errmsg.ini
messages\default\explain.ini
messages\default\fatal.ini
messages\default\fmgr.ini
messages\default\ns.ini
messages\default\nsr.ini
messages\default\nssrch.ini
messages\default\omfchck.ini
messages\default\omgr.ini
messages\default\readers
messages\default\readers.ini
messages\default\try.ini
messages\default\readers\gpa.ini
messages\default\readers\omni.ini
objects\addr
objects\addr.mod
objects\bintree.mod
objects\clue.mod
objects\instlpk.mod
objects\msgcat.mod
objects\ns.mod
objects\nsaddr.mod
objects\nsr.mod
objects\nssrch.mod
objects\omfchck
objects\omfchck.mod
objects\pk.mod
objects\readers
objects\readers.mod
objects\strtok.mod
objects\symlop.mod
objects\addr\lin32.mod
objects\omfchck\aout.mod
objects\omfchck\elf.mod
objects\omfchck\gpa.mod
objects\omfchck\ieee695.mod
objects\omfchck\omf386.mod
objects\omfchck\omf86.mod
objects\omfchck\omf96.mod
objects\omfchck\ticoff.mod
objects\readers\aout.mod
objects\readers\elf.mod
objects\readers\gpa.mod
objects\readers\ieee695.mod
objects\readers\omf386.mod
objects\readers\omf86.mod
objects\readers\omf96.mod
objects\readers\omni.mod
objects\readers\ticoff.mod
If you have a blank floppy disk, you can copy all of those files to a floppy while preserving the directory structure. Then insert the floppy into the 16500C before you power it on. Then when you power on the 16500C, it will copy all of the files to the SYSTEM directory while preserving the directory structure. That will take a while, longer than you might expect be patient. After the 16500C finishes booting up, the E2450A files should all be installed and the floppy is no longer needed.
If the 16500C is connected to your network, you could also FTP all of the files to the SYSTEM directory of the 16500C. Make sure you select BINARY mode in your FTP client before you transfer the files. Also make sure you preserve the directory structure of the E2450A files under the SYSTEM directory of the 16500C. That might be a bit tedious to do manually, depending on your FTP client.