by using a decent os, you can do that with ... (for whatever reason ;-)
md5sum <file>
btw - by enabling the project menu - you also enable the :DBGCMD:STAT? RX|TX|CLR|Q|PARSE SCPI commands
i suspect there is more to that, then the debug outputs ... something like reading/writing memory would rock ! ;-)
./dbgstat.py 10.146.248.190
(u16HostFetchErr = 0),(u16FifoLenErr = 0),(u32NoDataCnt = 24),(u32WaitDataCnt = 17),(u16FmtDataErr = 0),(u16FmtTypeErr = 0),(u16StateMachineErr = 0),(u16DeadLockCnt = 0),(u16SysFmtErr = 0),(u16AddrAccessErr = 0),(u32TotalTxByte = 7361),(u32CurTxByte = 124)
(u16InteruptCnt = 0),(u16WInQCnt = 0),(u16RxDataCnt = 0),(u16ProCnt = 48),(u16IBFullCnt = 0),
(u16InvalidCharacter = 0),(u16KeywordNotFound = 2),(u16CmdNotFound = 0),(u16TooManyKeyword = 0),(u16LastKeywordOmitted = 0),(u16CmdSNErr = 0),(u16InvalidCallBackFunc = 0),(u16CmdExcuteErr = 0),
(u16NoFreeNode = 0),(u16QIsFull = 0),(u16QIsEmpty = 0),(u16RxBufOverflow = 0),(u16RxDataPtrNull = 0),(u16RxDataLenErr = 0),