Siglent SDS800X HD 12 bit DSO's

[Furna]

Oops -- why is your UBoot at 3.8.12 rather than 2.8.12? What exact scope model do you have? (I assume the anti-aliased font is just due to switching to large font size?)

SDS824X HD bougth form Welectron  beginning of June 2024  ... I really have no idea what was the version before I updated the software
Yes the anti-aliased font is just the result of switching to large font size ... now you all know that I am an old guy 

I know for previous scopes they had a separate update for the OS (UBoot).

UBoot is not an OS ... it is a bootloader that in turn loads the OS
https://en.wikipedia.org/wiki/Das_U-Boot

Doesn't the UBoot version coincide with the OS version on the Siglent scope? I could be wrong, I was assuming. 🤷

While looking again at the image I realized that Siglent does not distinguish between the bootloader and the "OS" ... so sorry KungFuJosh.

[Furna]

AFAIK, Sigrok is not really actively developed and I don't think there is support for 2000X+ or any of the 12 bit scopes that support 16bit data format (v4).
If I'm wrong I would like to be corrected...

https://www.eevblog.com/forum/testgear/new-sigrokpulseview-hardware-support-(siglent-sds-hd-rigol-dho800-)/

Looks like someone is doing something 
Let's see what can be achieved.
Currently I am able to perform a basic acquisition ... need to setup some multi channel acquisition and get used to the scope as well; with limited time available.

[Furna]

At the end of April in EEVblog 1612, Dave teared down the SDS1000X HD; during that video we learnrd he also received an SDS824X HD.
Does anyone know if a tear down/review of the SDS824X HD is on schedule?

Thank you.

[tautech]

Does anyone know if a tear down/review of the SDS824X HD is on schedule?

Already done by Defpom:

[TomKatt]

Not quite the same…. He seemed a bit nervous to dive deep…

I was half curious if the SDS800X shared the SDS1000X HD platform…. Same processor?  Front end?

I’m surprised Dave hasn’t done a SDS800X HD / DHO800 comparison.

[tautech]

Not quite the same…. He seemed a bit nervous to dive deep…

And thankfully so when it's my unit ! 

I was half curious if the SDS800X shared the SDS1000X HD platform…. Same processor?  Front end?

No 50 Ohm inputs in SDS800X HD.

[nanopico]

Defpom's review is very useful, he convinced me to buy - maybe Siglent (via @tautech) will send him a small gift.
On the other hand, every review made by Dave has a special charm. I've also been waiting for a while.
If his SDS800X wasn't lost or stolen , I'm still waiting to see a presentation.

The next milestone after the successful SDS1000X-E series, for all the ones on a budget who are serious about electronics T&M.

Performa01 made a thorough professional analysis of the operation of the SDS800X HD oscilloscope.
https://www.eevblog.com/forum/testgear/sds800x-hd-review-demonstration-thread/msg5293741/#msg5293741