SPI still not working correctly with LA channels in the latest 01.02.00.02 release. Below are the release notes for all of the versions.
Agreed. It's so broken it's difficult to know where to start, but I'll have a stab at it.
When you select a digital channel for CS, it still wants a Threshold, but these are defined in the LA, 8 channels at a time. Choosing a digital channel for CLK or MISO greys out the Threshold.
If you set it up on analogue channels first, and get it to work, then try to switch the decoder to digital channels, it still refers to the analogue channels despite what the decoder screen says.
Changing the LA channel size to medium and especially large leaves you with a ton of blank space between the LA channels.
You seem to be able to change the order of the channels on the screen, but they are fixed to very course vertical grid, you can't reduce the blank space between channels other than by selecting small... which is tiny, even for me, and I usually prefer super small text!
Defaulting the LA channels to a zero volt threshold is nonsense on 99.9% of use cases for this scope.
![Rigol DHO800/900 Oscilloscope Bug Reports + Firmware](https://www.eevblog.com/forum/index.php?action=dlattach;topic=395194.0;attach=1995916;image)
![Rigol DHO800/900 Oscilloscope Bug Reports + Firmware](https://www.eevblog.com/forum/index.php?action=dlattach;topic=395194.0;attach=1995922;image)
![Rigol DHO800/900 Oscilloscope Bug Reports + Firmware](https://www.eevblog.com/forum/index.php?action=dlattach;topic=395194.0;attach=1995928;image)
![Rigol DHO800/900 Oscilloscope Bug Reports + Firmware](https://www.eevblog.com/forum/index.php?action=dlattach;topic=395194.0;attach=1995940;image)
![Rigol DHO800/900 Oscilloscope Bug Reports + Firmware](https://www.eevblog.com/forum/index.php?action=dlattach;topic=395194.0;attach=1995946;image)
![Rigol DHO800/900 Oscilloscope Bug Reports + Firmware](https://www.eevblog.com/forum/index.php?action=dlattach;topic=395194.0;attach=1995952;image)