Yes, they are generally close, but there are still quiet a few differences which will lead to confusion later on due to the different/missing labels. For example, when in the mV position and dBm mode, you have to press RANGE to change the "dBm-Ohm" setting. Similarly for temperature, it seems like you would press Select, but you need to use Range to change between T1/T2 modes, plus the label for T2 on the input jacks will not be there. Some performance aspects are also different, possibly due to some parts binning.
For checking LoZ, just connect the two DMMs together, common to common, V to V. Set one DMM to Ohms, set the other to LoZ or DC V. In the DC switch position it should measure about 10M Ohms, while in the LoZ it should be around 2.1K Ohms.