two years later... I am back
![Indifferent :=\](https://www.eevblog.com/forum/Smileys/default/indifferent0023.gif)
New firmware in beta version
Any posibilities:
- Auto hold (touch hold) -
OK- Auto-range in relative mode -
OK- Min/Max/AVG with auto-range -
OK- 10 or 5 reads per second -
OK- Best bargraph sample time -
OK- Use 10x feature to low burn voltage in uA (removing R57). -
OK- Short beep for good diode -
OK- Flash backligth for continuity test -
OK- Fast response in continuity test -
Yeah! Better- Extended setup options -
OK- Best average calc routine -
OK- Smooth mode for AC Volts -
OK- Compensation for true-rms converter error in 400 mV RMS operation. AD636 is disigned to 200 mV full scale and error grow significantly above 300 mV -
No!- Press any button for weekup -
OKhttps://youtu.be/Z0y45DUREvE