Watching Dave's live feed. Starts out talking about the video feed setup. I didn't see anything of interest during this. You may want to skip ahead.
About 17 minutes in. He's talking about UNI-T and margins. That mA res is hard to beat for automotive and I don't really need absolute accuracy. Plus they give it away. I would pay them double for a higher quality version of it. 22:47, UNI-T mentioned again.. Surprised no one is jumping in. 25:30 in, looking it up. Dang, $70 now. I thought we were getting these for $30.
Interesting comment about the UNI-Ts display being sideways. I like it that way. The are talking about leakage now and accuracy. IMO, I don't normally need it.
29:00 talking about UNI-T 61 now. Of course we have the Fluke 87.
30:00 discovers UT210B. Talks about wanting lower current version for electronics. Straw pole, pretty much everyone wants the lower current range.
35: starting to ask about using a standard DMM with shunt.
Wanky low...
P6042 lowest range is 1mA. Looks like there's one on eBay for $600 yankee dollars. Maybe someone will want it.
https://www.ebay.com/itm/325309029169?epid=1400242944&hash=item4bbdeddb31:g:qjAAAOSw-GNi~did&amdata=enc%3AAQAHAAAAoDongduZ9OKRFo20SQM3ytETKrD8C%2F%2By7T3I3ORHH4jd9vtjWk7TNPYq%2BZ4yj7BubEglOpFhqXCcYRd8dy%2FKy301iOxBnj4duOA%2B4T5NkLsyPypXadQrDvXxBP%2B2%2F%2F7DvmGn9UtsU9M%2BUd2AirSnK32Do6wWwEQmU3HBAuAbzqSynAnp5fRmmzF3TWZYyN%2BdEXM%2B2v1%2FlYS7gfcjpZ46OSo%3D%7Ctkp%3ABk9SR4SM_YzXYA41:00 Taking it apart. Hummm. Small diameter PTCs. Thicker than what I have seen on the really cheap meters. May hold up.
43:35 Brymen vs Fluke, input protection, who's the leader???
50: pulls the main PCB out.
51: under NDA.
53: trace wiggles and poor layout
55:19 I missed something. He reads a comment that is shown in the chat about the meter not being good enough for Dave's branding.
I thought that about the 121GW.
Ok, that's the end. I gave the video a thumbs up. Meter seems alright but isn't something I would have a use for.