Haha do you really withstand the waiting?
I would have opened mine long time ago!
U-Boot SPL 2020.07 (Jun 26 2021 - 08:49:36 +0200)
DRAM: 64 MiB
Trying to boot from FEL
And nothing else comes out. Tried loading only uboot, same results.
sunxi-fel -p uboot u-boot-sunxi-with-spl.bin write 0x80000000 zImage write 0x80700000 devicetree.dtb write 0x80708000 rootfs.cpio.uboot
I looked at that buildroot. Seems they did a great job patching and adding support for the F1C100s!
I'm trying it. I'm using the default allwinner cfg, which seems to be closer to hantek's cfg than the others.
The screen cfg is almost the same, but hantek uses 16bit, this is the correct LCD config:
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:16,pclk_khz:33333,le:35,ri:201,up:25,lo:10,hs:20,vs:10,sync:3,vmode:0"