I'll try a step by step instruction:
Press the Timer button to enter the Timer/Delayer feature.
Press soft button Timer Set
Press soft button Groups, enter 2, press OK.
Press soft button Parameters, use the Up(V), Down(mV), Left(mA), Right(A) keys to navigate the "cells" of the Groups at the bottom of the screen.
Enter 12V, 1A, 600s for Group 0 and 0V, 0A, 10s for Group 1.
Press the -->1/3 soft button until you see the Cycles option at the bottom, press it until Cycles reads infinite
Press the -->2/3 soft button until you see the 'Enter button' at the bottom, press it to get out of the configuration window.
Now enable the output and then press the Timer Off soft button, confirm the message with the OK button.
/Henrik.