Hi all,
I am looking for a DAQ for monitoring EMG signals. The required specifications are the following:
*At least 12CH ADC inputs
*At least 5kHz sampling rate per channel
*At least 14-bit ADC
I was looking at USB-1616FS, but at $1,015 it is a bit too expensive.
Can someone suggest any similar DAQ units which will work for this application.
Also, can someone please explain the following terms/sentences used in the USB-1616FS datasheet:
https://www.mccdaq.com/PDFs/specs/DS-USB-1616FS.PDF*with sample rates up to 50 kS/s per channel, continuous throughputs of 150 kS/s, and 32 kilosample bursts up to 200 kS/s
*With hardware paced mode, the maximum throughput rate is 50 kS/s for one channel, or 9.5 kS/s per channel for all channels. With burst scan mode, the maximum throughput rate is 50 kS/s per channel for one, two, or three channels, and 16.5 kS/s per channel for all 16 channels.
Am I right in saying 50kS/s is equivalent to 50kHz? What is the difference between paced mode and burst scan mode?
Thanks in advance.