Here the infos from my model:
Front:GNSS Disciplined Oscillator
BG7TBL 2019-10-20
Bootmessages:$GNTXT,01,01,02,u-blox AG -
www.u-blox.com*4E
$GNTXT,01,01,02,HW UBX-M8030 00080000*60
$GNTXT,01,01,02,ROM CORE 3.01 (107888)*2B
$GNTXT,01,01,02,FWVER=SPG 3.01*46
$GNTXT,01,01,02,PROTVER=18.00*11
$GNTXT,01,01,02,GPS;GLO;GAL;BDS*77
$GNTXT,01,01,02,SBAS;IMES;QZSS*49
$GNTXT,01,01,02,GNSS OTP=GPS;GLO*37
$GNTXT,01,01,02,LLC=FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFD*2F
$GNTXT,01,01,02,ANTSUPERV=*22
$GNTXT,01,01,02,ANTSTATUS=DONTKNOW*2D
$GNTXT,01,01,02,PF=3FF*4B
$GNRMC,213619.49,V,,,,,,,200620,,,N*66
$GNVTG,,,,,,,,,N*2E
According U-center: u-blox M8/8
Supports GPS, SBAS, Gallileo, BeiDou, IMES, QZSS, GLONASS
PCB date: 2020-04-06
Request for Help:I accidently set the receiver to the default receiver configuration in u-center.
I suppose, that there have been made custom changes in the configuration for GPSDO use.
I would be thankful, if someone with the same unit, or u-blox module, would send his configuration.
This can simply be done in U-center ->Tools -> Receiver Configuration ->"transfer GNSS ->file"
Chris