New firmware for SDS5000X models.
Version 0.9.1
60MB
https://int.siglent.com/upload_file/zip/firmware/Oscilloscope/SDS5000X_0.9.1_EN.ziphttps://siglentna.com/download/17103/https://www.siglenteu.com/download/9140/Release notes.
1. Acquire enhancement:
a) Added memory depth options: 5K(2CH), 10K(1CH), 25K(2CH), 50K(1CH)
b) Added the upper limit of Average to 65536, and optimized speed of Average
c) Supported ERES in Roll mode
2. New Triggers: Nth edge, Setup/Hold and Delay
3. Math enhancement:
a) Supported new math operators: Sign, Abs, Exp, Log, Identity and Negate
b) Supported F1 and F2 as the source of Formula editor
c) Supported Span-Center/Start-End mode in FFT
4. Measure: Supported setting maximum statistics number
5. Remote Control optimization:
a) Optimized read speed of WF command
b) Supported to export Math traces using WF command
6. Supported “Apply to AWG”in the “Cx -> Apply to” menu
7. Optimized SPO display
8. Supported saving .mat data format and bin2csv tool
9. Updated the Help information
10. Fixed several bugs
a) Vertical measure error increases as offset increases
b) Any operations when recalling default setting may cause UI abnormal
c) The scope sometimes forgets the previous math settings
d) Incorrect horizontal offset on reference of FFT trace
e) AWG auto-zero fails in normal mode