Interesting?
http://www.ebay.com.au/itm/140728043102?ru=http%3A%2F%2Fwww.ebay.com.au%3A80%2Fsch%2Fi.html%3F_trksid%3Dp3907.m570.l1313%26_nkw%3D140728043102%26_sacat%3D0%26_from%3DR40%26_fvi%3D1&_rdc=1#ht_5960wt_1133Soldering Station Digital DC Controller for HAKKO 936 Compatibles & 907 Iron Handle
This auction is for A CONTROLLER ONLY and DOES NOT include any iron handle, power adapter, etc.
This compact digital soldering iron controller can be powered by a common DC power adapter or a cigarette lighter cable.
Inexpensive Hakko 936 compatible iron handle having a standard 5 pin plug can be used directly.
- Features -
1. Compact size and excellent portability
2. At least as long as 2~3A, a variety of DC voltage sources can be applied.
3. Having excellent performance, widely used and inexpensive HAKKO soldering iron handles can be used.
4. Easily turn on/off the heater by clicking Stand-by button.
5. After 60 minutes, the heater automatically power off to save energy and protect the iron tip.
- Specifications -
1. Power consumption 60W
2. Input voltage DC 10 ~ 24V 2~3A (We recommend DC 19V 3A)
3. Temperature range 200 ~ 480 degree C
4. Size : 45 x 92mm [WxD]
1. The function description
- Temp- : Decrease the temperature setting value
- Temp+ : Increase the temperature setting value
- Memory : Set the temperature to the value in the memory.
Push and hold for 3 seconds then memorize the current temperature setting value.
- Toggle Standby : Easily Toggle between the standby mode(Heater-Off) and the normal operation mode(Heater-On).
2. Socket for the standard Hakko 5 pin plug
3. Supports 2 standard power adapter jacks (Don't use them together)
4. Usage example (Iron handle or power adapter are not included)
5. Description of LED display and messages.
6. If the plug of the iron handle is too short, please remove the cap.
7. With a cigarette lighter cable, it can be used using a car battery.