I got it going again. It appears by console port building wasn't as rock solid as I thought. I had to touch up one wire that wiggled loose. I ran the "i" command once I got it going. Does any of this look familiar?
-> i
NAME ENTRY TID PRI STATUS PC SP ERRNO DELAY
---------- ------------ -------- --- ---------- -------- -------- ------- -----
tExcTask _excTask 5ffca24 0 PEND 50575ec 5ffc98c 0 0
tLogTask _logTask 5ffa124 0 PEND 50575ec 5ffa088 0 0
tShell _shell 5ff6540 1 READY 50297fc 5ff6208 0 0
gpibIHTask _gpibIHTask 5fe8c50 4 PEND 50575ec 5fe8bd0 0 0
fifoTask _fifoTask 5ffe020 9 READY 502547c 5ffdfd4 0 0
causeEnable_causeEnable 5fffcd0 10 PEND 50575ec 5fffc40 0 0
rtcTicker _dateTimeQue 5feca04 51 DELAY 501ac22 5fec9b8 0 44
priority_no_priority_no 5fe9fb4 60 PEND 502547c 5fe9f70 0 0
grun Reboot_rebootGrun 5fe45fc 65 PEND 502547c 5fe45b4 0 0
GPIB monito_GpibMonitor 5fe82f0 68 PEND 502547c 5fe8288 0 0
GPIB reboot52032cc 5fe79b0 68 PEND 502547c 5fe7960 0 0
trigStatus _trigStatusQ 5fed3a0 69 DELAY 501ac22 5fed360 0 8
GPIB parser_Grun 5fe7070 70 PEND 502547c 5fe6cec 3d0001 0
V main _main 5ff2fc4 100 PEND 502547c 5ff2f28 3d0002 0
calThread3 _calRunner 5fff2fc 102 PEND 502547c 5fff2bc 0 0
calThread2 _calRunner 5ff0724 102 PEND 502547c 5ff06e4 0 0
calThread1 _calRunner 5fef5f8 102 PEND 502547c 5fef5b8 0 0
calThread0 _calRunner 5fee4cc 102 PEND 502547c 5fee48c 0 0
evalProcess_eval_loop 5feb6a0 120 PEND 502547c 5feb660 3d0002 0
value = 0 = 0x0
-> scopeErrorLogDumpToConsole
Scope Error Log Contents:
WED APR 04 15:22:59 2007 ERROR: 250 mass storage error, READ_FAIL [46,0,28,0,1,2,12,1b,ff]-> [40,20,20,28,0,3,2]
TUE APR 10 18:11:37 2007 ERROR: 250 mass storage error, READ_FAIL [46,4,0,1,1,2,12,1b,ff]-> [44,20,20,0,1,11,2]
TUE APR 10 18:14:08 2007 ERROR: 250 mass storage error, FORMAT_FAIL [4d,4,2,12,6c,f6]-> [44,0,0,f6,2,1,2]
value = 0 = 0x0
->