Hi,
first time poster, not a pro but curious
Have a Jedia Mobile 60 PA amp I'm using the 70 volt tap for speakers.
Worked fine for 10 years.
Now it's not turning On, no LED.
Checked the 2 fuses, one on the AC connector, the other inside, all good.
The only weird thing I found is the voltage at the secondary of the power transformer reads 0 volt (?). I've unplugged the 2 wires from the circuit and I'm measuring in AC
If I measure the phase individually to ground it reads 20volt each.
Is the transformer dead ?
Thanks in advance
Eric