I have this key for my car with buttons to lock and unlock remotely ( Like all cars I guess now a days).
Recently it began acting strange and requiring me to press the lock/unlock buttons multiple times before it finally worked.
I was thinking possible battery being low or maybe faulty switch, so I pulled the key apart to test.
What I found was strange and this is reason for my post.
Measuring the switch on volts and watching to see if it was working, meter placed across the switch...when I pressed the button, the key worked perfect. Take the leads off and it doesn't work any more.
The battery measured 3.05V and its CR2016 3V cell. New they measure 3.3 so I guess it was a bit low, but my wife's key works flawlessly and I checked her battery and it also measured 3.05.
Replacing the battery does fix the issue, but only for a month or so, then its back to not working.
But what I cannot understand is why the key works perfect when the meter leads are across the switch and doesn't work when disconnected.