I'll get more pics soon as I can.
I did receive it today and some of you may have seen it on ebay listed as having a network password that could not be removed. short thing, it is now removed. So first off in anyone runs into that issue this is what I did to remove it.
most of what you see via google talks about getting a command prompt and deleting the *.PWL files. those files are for local login accounts not network login accounts, you have to get into the control panel and disable it
so first create a win98 boot disc, mine unit has a 1.25" floppy not the LS120 drive so I downloaded bootdisk from keysight. the only links do not work but I found them on the keysight sight
you'll want this file
ftp://ftp.keysight.com/pub/callpub3/ddt/scope/548xx/Upg_Rec/bootdisk/CD_boot.zipunzip it and copy to your floppy and boot the scope
once at a dos prompt go to the C: drive and edit the msdos.ini file and enable the bootmenu=1 currently it is bootmenu=0 you can also change the time the menu stays on screen, I changed mine to 30s via bootwait=30 (doing from memory so may not be the correct one there but should get you there.
once done remove the floppy and reboot
when the menu comes up, select safe mode
go into the control panel and remove all the accounts you dont' want and create one for yourself
also go into the network setup and disable network login
once done, exit and reboot
you'll get a logon screen enter the ID and password you set up
it will setup the new user and eventually you'll have a scope screen
I'll see if I can do a better guided description of that soon
i do see some problems with the FISO?? test for Ch1, Ch2-4 test ok.
i think this is the one where cleaning the hybrid has helped so I will try that. I'll try to get some pics of it also