I don't know why, but my instincts tells me that is a 4.1v maximum cell, so that charger won't do, because it has a fixed 4.2v charge voltage. If this isn't the case, please someone else chime in and correct me.
If it isn't the case, and you do use this chip, i'd recommend a 0.5C charge rate, or thereabouts, small cells don't like high charge rates. That can be obtained by using a 3.3k~ resistor between PROG (6) and ground.
At that charge rate, temperature monitoring isn't really needed, so you can ground the temp pin (1).