Hi folks,
I found this old thread but decided to build the Jay Diddy version of the pulser.
In one of the replies he provided the Gerber files for the PCB.
There had been a lot of changes in the design, all documented in the thread, but one issue has been left open.
In the gerber files provided, U3 is actually a 555 timer, NOT a LTC1799CS5.
C7 and C8 are also missing in the all versions of the schemitics provided untill now.
I consulted Jay_Diddy (in another thread) which promptly provided the "old version" of the schematics used as reference for the Gerber files, which I decided to post here for reference, in case some other person decides to build this project.
Thanks again for Jay_Diddy.
Transmission Line Avalanche Pulse - Nov 28 2013.pdf (28.83 kB - downloaded 247 times.)