3D step file for cable clamp (type used for 1110 Utility box)

[Jester]

I'm looking for a step file for this type of connector or something very similar, they refer to these as a 1/2" cable clamp, even though the actual knockout holes in the 1110 Utility boxes are actually 7/8"
[attachimg=1

[thm_w]

Is this for 3D printing or for modeling?

mcmaster has some but not really that style:
https://www.mcmaster.com/armored-cable-connectors/

https://www.3dfindit.com/en/cad-bim-library/manufacturer/abb-installation-products/conduit-and-cable-fittings/rigid-and-intermediate-metal-conduit-fittings?path=thomas_betts%2Ffittings%2Frigid_fittings

I would just sketch an approximate if not.

[Jester]

For modeling and that is close enough for this model.

Much appreciated, I was unaware that McMaster had step files, one more source.

[AndyC_772]

Might be worth a look on https://www.3dcontentcentral.com/