List Of Electronics Youtubers - Comprehensive List - Old Version

[ez24]

New version of list is posted.  This took out links to members (to save space) and the spreadsheet that the list is based on, has been improved to make it much much easier to use and maintain.  Before I had to build up links by paying attention to syntax and after about 5 links it got really hard to see the "[" and "/" s.  Now only the link address is needed and Brumby set it up that that link is automatically formatted.

Now anyone who can paste into a spreadsheet cell can maintain the list.

Thanks Brumby very very much   


FYI  - As of June 24, 2017  the character size is 32k  (50k limit).

[pitagoras]

I think this guy deserves an entry, he has a great series of videos about opamps and stability.
Recommended to me by @ZeTeX

https://www.youtube.com/channel/UCKEVTN-ZlbM6vWJMQ_ZjatQ/videos

[Cliff Matthews]

SN3 Innovations, LLC is a company and not a guy (or singular person). But they seem to count as having 9 of 10 requisite electronics video's to fulfill Dave Jones' requirements.. I haven't listened to any of their stuff yet, but when they teach electronics, are they trying to sell anything all through-out?

[pitagoras]

SN3 Innovations, LLC is a company and not a guy (or singular person). But they seem to count as having 9 of 10 requisite electronics video's to fulfill Dave Jones' requirements.. I haven't listened to any of their stuff yet, but when they teach electronics, are they trying to sell anything all through-out?

I see. I had not read the requirements. I've just watched the 6 videos about opamp stability and wanted to share my experience. And in those 6 videos they sell nothing, just a whiteboard and explanations.
But yeah I went and googled the company after watching a couple of videos so yes, maybe they serve as promotion of the company after all...
Anyway...

[ez24]

https://www.youtube.com/channel/UCKEVTN-ZlbM6vWJMQ_ZjatQ/videos

Sorry I could not even watch for 5 seconds without wanting to scream - what are they thinking about with the background music in a tutorial ?

[Cliff Matthews]

Nothing wrong promoting your company, I was just asking your opinion if they were selling while teaching..
I subscribed to them, and watched loop gain #1. If they're going to continue distracting with continuous back-beat, the young whiteboard bodybuilder guy sure needs a lapel (inalambrico). I'd also offer an opinion that berating other EE's with lines like, "mistakes a lot of engineers make.." when in fact, his age likely doesn't put him at a level to speak that way.
I'm not sure what others think but sure, maybe there's room on the list.

[Cliff Matthews]

Quote from: ez24 on Today at 04:50:57 PM>Quote from: pitagoras on Yesterday at 10:47:53 PM>https://www.youtube.com/channel/UCKEVTN-ZlbM6vWJMQ_ZjatQ/videos

Sorry I could not even watch for 5 seconds without wanting to scream - what are they thinking about with the background music in a tutorial ?

Ha, EZ24 beat me to it!! 

[bitseeker]

New version of list is posted.

Thanks Brumby very very much   

Thanks ez24, Brumby and everyone who has contributed to the list. It's an impressive catalog of relevant content producers.

One correction I noticed while skimming the list: The Post Apocalyptic -> The Post Apocalyptic Inventor

[Cliff Matthews]

Still working on things.. Temporary sheet. I'll merge with most recent sheet soon.

[Brumby]

Check with ez24 before you use the one I published on 24th June.  It might be out of date already.

[ez24]

Check with ez24 before you use the one I published on 24th June.  It might be out of date already.

I have not done anything to the 24th version (The Great One) other than post it, so it is good to go  .  FYI  I put the date that it was uploaded at the end of the file name.  I cannot make heads or tails with the XLS version that Cliff is using, I just hope his data can go into the June 24th version.

[Brumby]

Check with ez24 before you use the one I published on 24th June.  It might be out of date already.

I have not done anything to the 24th version (The Great One) other than post it, so it is good to go  .  FYI  I put the date that it was uploaded at the end of the file name.  I cannot make heads or tails with the XLS version that Cliff is using, I just hope his data can go into the June 24th version.

I've seen a sample of Cliff's spreadsheet - and I can see it might need a gentle massage.

What I suggest is this....
 * Cliff - enter only the new data you want added and then make it available to me.
 * I will then massage it into the new format and add it to the spreadsheet.
 * This can then be passed on to ez24 to check, sort and post.

[ez24]

Any chance My channel could get an add? Looking to do more videos of working in my lab and some tutorials and such!

Your YT channel has been added.  Sorry for the delay we are going through changes.  From HTML editing to spreadsheet editing.  Be sure to check your links.

[ez24]

Linking to usernames does not work either, f.ex. I have a youtube username with my original channel, later I created a brand channel for my electronics, but visiting through my username you will only see my personal video channel and not the electronics.

Do you have a YT channel? If so and you want it on the list - include a link to it.  Also add a link to it in your Profile

thanks

[Cliff Matthews]

IMO, top of the list ought to go to those who's labor earned subscriber dedication, not for the few finding it easier to sort..

[ez24]

IMO, top of the list ought to go to those who's labor earned subscriber dedication, not for the few finding it easier to sort..

When I was working in HTML the numbers showed up better and made it easier to work with.  Now that I am using Brumby's spreadsheet it is now harder to work with the numbers.

For example:

I added a name given by a forum member and when I pasted the info into the sheet strange things started to happen.  When I Paste Special the info, some cells shifted and threw out the links.  It took me 1/2 hour to figure out that since I was adding a dup strange things happened.  If it were easy to see the names then I would have seen the name was already there.  It was the number of subs that threw me off, there was a big change in the number from the original addition to the new attempt so I did not see the dup.

Also I think it less likely someone will post a dup if it is easier to find the name since that does not change but the number does.  I assume the original poster did not see the dup just like me.

So it is simply easier to maintain if sorted on the YT name.   I am working to make it as simple as possible to maintain because of the size.  There's been some features that I would like to make but they would make it harder to maintain so I backed off.  Brumby is also working on his spreadsheet to make it easier to maintain.

As far as landing on the YT Home page and seeing those annoying self playing videos.  I think most people can deal with them because they are only looking at one YTer at a time and not many like you or me.  If landed on the Video page then the number of subs cannot be seen.  This will make it harder to update the subs.  It took me several hours to update the subs and I think it would have taken me twice as long if I had to scroll on each member.  I agree with you the videos are very annoying but it makes it easier to maintain if the link lands on the Home tab where the subs are visible.  Scrolling takes a long time when doing almost 200 names.

Your idea of getting rid of links to members made it easier to maintain so I got rid of member links.  Thanks

[tautech]

If landed on the Video page then the number of subs cannot be seen.  This will make it harder to update the subs.  It took me several hours to update the subs and I think it would have taken me twice as long if I had to scroll on each member.  I agree with you the videos are very annoying but it makes it easier to maintain if the link lands on the Home tab where the subs are visible.

I don't see this.
Eg. Defpoms Videos page does have the subs at top right:
https://www.youtube.com/user/TheDefpom/videos

[tautech]

I don't see this.
Eg. Defpoms Videos page does have the subs at top right:
https://www.youtube.com/user/TheDefpom/videos

Maybe a monitor or computer issue.  Attach pic is what I see.  I have to scroll up to see the subs.

No I think it's a subscription issue. FYI I haven't subscribed to any YT channels....none at all.
Attached is what I see with sub #'s.

[KD0CAC John]

Thanks for all the work guys & gals , kinda ?
I was thinking that I had TOOOOO-MANY sources before the list , now I'm really going to get blurry vision

[Brumby]

ez24's test is the result of a bad sort, but a recent modification to the spreadsheet has presented an obvious solution.  I am in the process of implementing a solution that will make it more resilient.

[Brumby]

Updated spreadsheet sent.

(Entering the arena for competition with Ben Hur!)

[Brumby]

Yes, well.... It looks worse than it is.

Each INDIRECT function sets up a cell reference - and that's all it does, but the structure of what's inside that function is not particularly clear.

The reason this function was used is because it breaks the hard link between a cell reference and the contents of that cell, that can result in a #REF problem when, for example, you delete a row.  This enabled the data to have rows inserted, deleted and sorted without affecting the integrity of the output.


(You should see the spreadsheet I have been working on to help an eBay seller I know change the image URLs in their listings - because of Photobucket's latest extortion.)



I'm just glad that I have been able to make the maintenance job easier - especially for a volunteer effort.

Nothing takes the shine off a good idea more than the drudgery of maintenance, especially when it involves inordinate care in doing so.

[Cliff Matthews]

One more: https://www.youtube.com/user/ElektronikLabor/videos
3k subs (he's EEVblog member ElektronikLabor - https://www.eevblog.com/forum/profile/?u=93965 )

Misc. test equipment, teardowns and repairs in German (sounds English-bilingual on naming and phrases)

[mikeselectricstuff]

Tanner Tech - young youtuber , 1700 subs, educational electronics vids
https://www.youtube.com/channel/UCR1ARVDHnmTC3sUOkS4mUsg/videos

[tautech]

EZ
We've had a heap of 502 forum errors today, F5 normally sorts things out.