Author Topic: Server Error Reports  (Read 777971 times)

0 Members and 3 Guests are viewing this topic.

Offline gnifTopic starter

  • Administrator
  • *****
  • Posts: 1707
  • Country: au
  • Views and opinions are my own
    • AMD
Re: Server Error Reports
« Reply #375 on: January 02, 2021, 05:56:42 am »
Work has been completed, if there are any further issues please as usual post the details here and I will do what I can :)
 
The following users thanked this post: SilverSolder, MK14, bd139, beanflying

Offline S. Petrukhin

  • Super Contributor
  • ***
  • Posts: 1273
  • Country: ru
Re: Server Error Reports
« Reply #376 on: January 02, 2021, 07:10:20 pm »
We must be thinking about different issues then, I am talking about the one where the full size image gets replaced by a future image post. My investigation points to an issue with GlusterFS.
Is this fixed yet?
And sorry for my English.
 

Online RoGeorge

  • Super Contributor
  • ***
  • Posts: 6791
  • Country: ro
Re: Server Error Reports
« Reply #377 on: January 02, 2021, 07:18:25 pm »
I didn't noticed any downtime, but right now each page has a terrible slow response.  It takes 2-3 seconds to return a page.  The pages were loading without any noticeable lag in the previous days.

Browsing from Bucharest/Romania/EU.  Other sites are working just fine, only EEVblog takes many seconds to return a forum page.

Offline PA0PBZ

  • Super Contributor
  • ***
  • Posts: 5222
  • Country: nl
Re: Server Error Reports
« Reply #378 on: January 02, 2021, 07:21:44 pm »
It was quite slow for me until yesterday but it's all good now. YMMV of course.
Keyboard error: Press F1 to continue.
 

Offline SilverSolder

  • Super Contributor
  • ***
  • Posts: 6126
  • Country: 00
Re: Server Error Reports
« Reply #379 on: January 02, 2021, 08:42:39 pm »

I am also seeing slow page response times on initial load.
 

Offline PA0PBZ

  • Super Contributor
  • ***
  • Posts: 5222
  • Country: nl
Re: Server Error Reports
« Reply #380 on: January 02, 2021, 08:46:12 pm »
Yeah, never post 'all good now' because after that it slowed down again  :(
Keyboard error: Press F1 to continue.
 

Offline gnifTopic starter

  • Administrator
  • *****
  • Posts: 1707
  • Country: au
  • Views and opinions are my own
    • AMD
Re: Server Error Reports
« Reply #381 on: January 02, 2021, 11:05:37 pm »
We must be thinking about different issues then, I am talking about the one where the full size image gets replaced by a future image post. My investigation points to an issue with GlusterFS.
Is this fixed yet?

It should be, time will tell.


I am also seeing slow page response times on initial load.

Performance metrics show the website is loading about 5% faster then prior to the upgrade, it's likely due to your geographical location.
 

Online RoGeorge

  • Super Contributor
  • ***
  • Posts: 6791
  • Country: ro
Re: Server Error Reports
« Reply #382 on: January 03, 2021, 12:17:17 am »
The speed seems back to normal right now.  The lag is gone, thanks.

Offline S. Petrukhin

  • Super Contributor
  • ***
  • Posts: 1273
  • Country: ru
Re: Server Error Reports
« Reply #383 on: January 03, 2021, 11:00:41 am »
Another small bug: it seems that if the user did not specify the country, the place of the flag is displayed crookedly.
And sorry for my English.
 

Offline S. Petrukhin

  • Super Contributor
  • ***
  • Posts: 1273
  • Country: ru
Re: Server Error Reports
« Reply #384 on: January 03, 2021, 11:02:46 am »
And I still can't attach the inserted full-size image. See previous post: I specified inline full-size, but it still inserts as a tumb.
And sorry for my English.
 

Offline gnifTopic starter

  • Administrator
  • *****
  • Posts: 1707
  • Country: au
  • Views and opinions are my own
    • AMD
Re: Server Error Reports
« Reply #385 on: January 03, 2021, 11:06:53 am »
Neither of which are server issues but rather quirks of SMF sorry.
 

Offline PA0PBZ

  • Super Contributor
  • ***
  • Posts: 5222
  • Country: nl
Re: Server Error Reports
« Reply #386 on: January 03, 2021, 11:09:09 am »
And I still can't attach the inserted full-size image. See previous post: I specified inline full-size, but it still inserts as a tumb.

The plugin was disabled, the options still show but they do nothing. I think it was disabled in search of the mysterie picture swapping.
If it stays disabled it would be best to remove the options too.
Keyboard error: Press F1 to continue.
 

Offline gnifTopic starter

  • Administrator
  • *****
  • Posts: 1707
  • Country: au
  • Views and opinions are my own
    • AMD
Re: Server Error Reports
« Reply #387 on: January 03, 2021, 11:11:17 am »
And I still can't attach the inserted full-size image. See previous post: I specified inline full-size, but it still inserts as a tumb.

The plugin was disabled, the options still show but they do nothing. I think it was disabled in search of the mysterie picture swapping.
If it stays disabled it would be best to remove the options too.

I will suggest to Dave to re-enable it as I am pretty confident it was not the cause.
 

Offline S. Petrukhin

  • Super Contributor
  • ***
  • Posts: 1273
  • Country: ru
Re: Server Error Reports
« Reply #388 on: January 03, 2021, 11:24:14 am »
And I still can't attach the inserted full-size image. See previous post: I specified inline full-size, but it still inserts as a tumb.

The plugin was disabled, the options still show but they do nothing. I think it was disabled in search of the mysterie picture swapping.
If it stays disabled it would be best to remove the options too.

But I can see how other users display full-screen images...
And sorry for my English.
 

Offline S. Petrukhin

  • Super Contributor
  • ***
  • Posts: 1273
  • Country: ru
Re: Server Error Reports
« Reply #389 on: January 03, 2021, 11:27:01 am »
Neither of which are server issues but rather quirks of SMF sorry.

Can someone fix this? It seems to me that there is simply no file 00.gif in the directory with flags.  :)
And sorry for my English.
 

Offline gnifTopic starter

  • Administrator
  • *****
  • Posts: 1707
  • Country: au
  • Views and opinions are my own
    • AMD
Re: Server Error Reports
« Reply #390 on: January 03, 2021, 11:29:43 am »
Neither of which are server issues but rather quirks of SMF sorry.

Can someone fix this? It seems to me that there is simply no file 00.gif in the directory with flags.  :)

You're posing into `Server Error Reports`, not `Forum Error Reports`. I am the server admin, not forum admin, this is up to Dave
 

Offline PA0PBZ

  • Super Contributor
  • ***
  • Posts: 5222
  • Country: nl
Re: Server Error Reports
« Reply #391 on: January 03, 2021, 11:31:27 am »
But I can see how other users display full-screen images...

Attach the image to your post and save, then copy the link for the full-sized image, edit your post and put the link between img tags.
Anyway, this thread is not for this stuff, so I will not post more. If you can't work it out ask in general.
Keyboard error: Press F1 to continue.
 
The following users thanked this post: gnif, MK14, S. Petrukhin

Online RoGeorge

  • Super Contributor
  • ***
  • Posts: 6791
  • Country: ro
Re: Server Error Reports
« Reply #392 on: January 06, 2021, 10:32:01 am »
Not really an error, but it is very slow and very laggy again.  Text is reasonably OK, but pics are unusable slow to me.

Took about 10-20 seconds to open the two attachments here https://www.eevblog.com/forum/metrology/software-for-automated-testing-(scpi)/msg3402554/#msg3402554 (less than 200k).

This happens only with EEVblog forum, other websites are as snappy as last year.   :-//

Happens with all the pics, these took 3-5 seconds to open each:
https://www.eevblog.com/forum/testgear/rigol-dsxxxx-gel-firmware-file-format/msg3402398/#msg3402398

Even the forum elements, like the black grid with circles background seems slow, in the sense that it feels like the page is waiting for them.
« Last Edit: January 06, 2021, 10:37:29 am by RoGeorge »
 

Offline gnifTopic starter

  • Administrator
  • *****
  • Posts: 1707
  • Country: au
  • Views and opinions are my own
    • AMD
Re: Server Error Reports
« Reply #393 on: January 06, 2021, 10:35:02 am »
Loading extremely fast for me, and I am not local (AU vs US) to the server. Local route or ISP issue for you sorry.
 

Online RoGeorge

  • Super Contributor
  • ***
  • Posts: 6791
  • Country: ro
Re: Server Error Reports
« Reply #394 on: January 06, 2021, 11:18:40 am »
I'm seeing a lot of weird "pagespeed" URL's, don't know if a week or so ago, when the forum was working great, was the same.

https://stackoverflow.com/questions/13113383/weird-pagespeed-url-for-png-image

Already deleted all caches and cookies, and it is as bad as before deletion.
Does by any chance Google Pagespeed was somehow turned on this year?  Usually browsing from a desktop with latest Kubuntu/Firefox.

Just tested moments ago with Pale Moon, and EEvblog forum is almost unusable, will install just for a quick test Chromium...

Offline gnifTopic starter

  • Administrator
  • *****
  • Posts: 1707
  • Country: au
  • Views and opinions are my own
    • AMD
Re: Server Error Reports
« Reply #395 on: January 06, 2021, 11:20:34 am »
I'm seeing a lot of weird "pagespeed" URL's, don't know if a week or so ago, when the forum was working great, was the same.

https://stackoverflow.com/questions/13113383/weird-pagespeed-url-for-png-image

Already deleted all caches and cookies, and it is still very bad.
Does by any chance Google Pagespeed was somehow turned on this year?  Usually browsing from a desktop with latest Kubuntu/Firefox.

Just tested moments ago with Pale Moon, and EEvblog forum is almost unusable, will install just for a quick test Chromium...

We have had pagespeed installed and active on the server for well over 2 years now. This is not the cause of any issues you are having. I collect performance metrics from 4 countries every 2 minutes across all of Dave's cluster, at current, there is not, nor has there been any degradation in performance and all pages are rendering correctly. If you are experiencing issues it is on your end.
« Last Edit: January 06, 2021, 11:23:38 am by gnif »
 

Offline Ranayna

  • Frequent Contributor
  • **
  • Posts: 916
  • Country: de
Re: Server Error Reports
« Reply #396 on: January 06, 2021, 01:50:44 pm »
For what it's worth: The forum was really slow for me intermittently today as well. At the moment it's better, but still somewhat slow.

EDIT: Debatable whether this is a server issue or a forum issue  :-//

What i see in the network tab of Chrome, is that mainly external stuff takes long to load. The main culprit seems to be supplyframe.com. Almost all requests to them take 500 to 1000 miliseconds to load, and there are quite a few of them.
« Last Edit: January 06, 2021, 02:00:34 pm by Ranayna »
 

Offline gnifTopic starter

  • Administrator
  • *****
  • Posts: 1707
  • Country: au
  • Views and opinions are my own
    • AMD
Re: Server Error Reports
« Reply #397 on: January 06, 2021, 03:33:02 pm »
EDIT: Debatable whether this is a server issue or a forum issue  :-//

It is not debatable, I have metrics to prove that the server is operating within norms and there are no slow requests. Complaints of slow image loading (static files) can ONLY be attributed to a network issue between the user and the server. If it were the server I would have multiple alarms as these servers are actively monitored for such issues.
 

Offline Ranayna

  • Frequent Contributor
  • **
  • Posts: 916
  • Country: de
Re: Server Error Reports
« Reply #398 on: January 06, 2021, 04:16:46 pm »
I apologize if my report is not in the proper thread. But there is no other one that i am aware of where forum issues can be reported. And as a user it is not always easy to be aware if whatever issue is occuring is a server or forum issue. Mostly, from the user side, these are synonymous.
 

Offline beanflying

  • Super Contributor
  • ***
  • Posts: 7375
  • Country: au
  • Toys so very many Toys.
Re: Server Error Reports
« Reply #399 on: February 03, 2021, 02:41:32 am »
Hey Gnif,

can you take a look at the server load? Getting some slow load times (not always) and a few database not found issues (seemingly random once or twice in the last few days).

keep up the good work  :-+
Coffee, Food, R/C and electronics nerd in no particular order. Also CNC wannabe, 3D printer and Laser Cutter Junkie and just don't mention my TEA addiction....
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf