Author Topic: 3D-Printing (Read 15982 times)

mamalala · « **on:** February 11, 2016, 03:41:22 am »

I'm wondering...

Can we have a section dedicated to 3D printing here? I mean, we have renewables, thermal imaging... 3D printing is a thing, actually, so why not having a sub section on this forum for it?

Greetings,

Chris

ElektroQuark · « **Reply #1 on:** February 11, 2016, 10:09:51 am »

Very interested here.

Galenbo · « **Reply #2 on:** February 11, 2016, 04:59:42 pm »

Why only concentrate on CNC additive manufacturing, when several CNC manufacturing techniques coexist, and all have their place in the industry?

Fred27 · « **Reply #3 on:** February 12, 2016, 08:24:43 pm »

I agree with Galenbo. If you're going to have a section it might as well be a bit broader and encompass various CNC techniques. Let's be honest there are plenty of specific places for CNC and 3D printing anyway.

EEVblog · « **Reply #4 on:** February 12, 2016, 10:56:34 pm »

No real objections from me.
Moved this thread to general chat to get more comments.

Morgoroth · « **Reply #5 on:** February 12, 2016, 11:03:39 pm »

what about CNC and 3D models for PCBs ?, must be something to say in that matter specifically, PCB routing, boxes, supports, best practices, etc etc... and not much to see on youtube

Brumby · « **Reply #6 on:** February 13, 2016, 02:34:17 am »

"CNC - 3D printing, milling and more"

ElektroQuark · « **Reply #7 on:** February 13, 2016, 07:56:29 am »

Mechanical forum?

george graves · « **Reply #8 on:** February 13, 2016, 08:09:24 am »

Can we have a political/religious sub-forum too? A place for people that like to talk(argue) about such? It works well for another forum I'm on. All the people that are into that, can get their fill there - rather then dumping it into EE topics.

Brumby · « **Reply #9 on:** February 13, 2016, 08:20:32 am »

Indeed. The difficulty in sub-boards is defining the area of interest so that it is distinct, big enough to be busy but small enough to not get lost in.

My vote is for CNC level. That covers a lot of similar technology.

Quote from: Brumby on February 13, 2016, 02:34:17 am

"CNC - 3D printing, milling and more"

manzini · « **Reply #10 on:** February 13, 2016, 12:28:58 pm »

Another vote for 3D additive / CNC section: DIY, brands/products, services & experiences.

maybe into o a little cross with the current PCB section but including enclosures and accessories.

Artlav · « **Reply #11 on:** February 13, 2016, 03:29:20 pm »

+1 for the section.
Name... Something to the effect of "DIY automated manufacturing (CNC, 3D printing, etc)", perhaps?

chris_leyson · « **Reply #12 on:** February 13, 2016, 04:33:19 pm »

I prefer CNC subractive manufacturing, old school. Good 3D printers can do sintered metals, a wide range of plastics but that is professional printers. Home and hobby printers that essentially dribble hot snot everywhere are a waste of time and money.

chris_leyson · « **Reply #13 on:** February 13, 2016, 04:50:33 pm »

As for the religious sub forum it's just not going to work is it, just be a bunch of narrow minded bigots posting bull shit, same as the free energy stupid uneducated posters who can't think, period. Does this forum really want a bunch of stupid bigots posting bull shgit. NO.

Morgoroth · « **Reply #14 on:** February 13, 2016, 05:09:44 pm »

Quote from: Artlav on February 13, 2016, 03:29:20 pm

+1 for the section.
Name... Something to the effect of "DIY automated manufacturing (CNC, 3D printing, etc)", perhaps?

I always wanted to know if there is a difference using ball screws and belts, in terms of repeatability, and if worth to buy ball screws for precise milling, given the price...

rrinker · « **Reply #15 on:** February 13, 2016, 05:54:38 pm »

Too many sub boards makes a moderator nightmare - someone posts in the wrong section, it gets missed, which results in the inevitable dozen followup posts of "this is the wrong section, you moron"

Though I do wholly support a 3D printing subsection - maybe encompassing related things rather than being absolutely 3D printers only - like laser cutters and the such, all of which have applications in and of electronics design.

zapta · « **Reply #16 on:** February 14, 2016, 10:22:33 pm »

Quote from: EdoNork on February 13, 2016, 07:56:29 am

Mechanical forum?

That's an excellent scope for all the mechanical aspects, including 3D printing, and yet it has an engineering connotation.

I read the forums using the list of all new posts but have a dedicated forum is in a sense and invitation or a permission to discuss that topic.

ChunkyPastaSauce · « **Reply #17 on:** February 27, 2016, 04:29:16 am »

I'd love to see a mechanical section, a mechatronics section, or a general manufacturing section. I'm actually a ME by degree and work, but enjoy electronics too. I'm sure a lot of others as well. And really like the intersections between fields... lots of interesting stuff happens

AlessandroAU · « **Reply #18 on:** February 28, 2016, 10:40:27 pm »

Quote from: chris_leyson on February 13, 2016, 04:33:19 pm

I prefer CNC subractive manufacturing, old school. Good 3D printers can do sintered metals, a wide range of plastics but that is professional printers. Home and hobby printers that essentially dribble hot snot everywhere are a waste of time and money.

I don't know what you consider to be acceptable quality but these are the results I get from my hobby printer. I think it's quite acceptable, Most of the parts printed are mechanical upgrades for the printer itself.

ANTALIFE · « **Reply #19 on:** February 29, 2016, 01:39:20 am »

Quote from: chris_leyson on February 13, 2016, 04:33:19 pm

I prefer CNC subractive manufacturing, old school. Good 3D printers can do sintered metals, a wide range of plastics but that is professional printers. Home and hobby printers that essentially dribble hot snot everywhere are a waste of time and money.

Wow there grampa, don't get too cranky. I have a 12" Prusa i3v printer and have to say it's one of the best investments I've ever made. But different strokes for different folks I guess...

Quote from: AlessandroAU on February 28, 2016, 10:40:27 pm

Quote from: chris_leyson on February 13, 2016, 04:33:19 pm
I prefer CNC subractive manufacturing, old school. Good 3D printers can do sintered metals, a wide range of plastics but that is professional printers. Home and hobby printers that essentially dribble hot snot everywhere are a waste of time and money.

I don't know what you consider to be acceptable quality but these are the results I get from my hobby printer. I think it's quite acceptable, Most of the parts printed are mechanical upgrades for the printer itself.

Looking good, that's about where my quality hangs. I've seen some super impressive prints on /r/3dprinting but the amount of time you would need to spend on calibrations just seems too much for me in terms of investment vs return.

Galenbo · « **Reply #20 on:** February 29, 2016, 08:06:45 am »

Quote from: ANTALIFE on February 29, 2016, 01:39:20 am

Quote from: chris_leyson on February 13, 2016, 04:33:19 pm
I prefer CNC subractive manufacturing, old school. Good 3D printers can do sintered metals, a wide range of plastics but that is professional printers. Home and hobby printers that essentially dribble hot snot everywhere are a waste of time and money.
Wow there grampa, don't get too cranky. I have a 12" Prusa i3v printer and have to say it's one of the best investments I've ever made. But different strokes for different folks I guess...

What's the sellable non-artistical non-decoration-only usable product you produced with it?

sarepairman2 · « **Reply #21 on:** February 29, 2016, 08:25:26 am »

i want a forum where we can spam relentlessly. why? because chan image boards are fucking stupid and i enjoy spamming real forums.

NilByMouth · « **Reply #22 on:** February 29, 2016, 08:41:48 am »

Quote from: Galenbo on February 29, 2016, 08:06:45 am

Quote from: ANTALIFE on February 29, 2016, 01:39:20 am
Quote from: chris_leyson on February 13, 2016, 04:33:19 pm
I prefer CNC subractive manufacturing, old school. Good 3D printers can do sintered metals, a wide range of plastics but that is professional printers. Home and hobby printers that essentially dribble hot snot everywhere are a waste of time and money.
Wow there grampa, don't get too cranky. I have a 12" Prusa i3v printer and have to say it's one of the best investments I've ever made. But different strokes for different folks I guess...
What's the sellable non-artistical non-decoration-only usable product you produced with it?

I printed feet for my vintage oscilloscope (http://www.thingiverse.com/thing:1336064). I also printed a small electronics enclosure, which I can mod by adding holes of exactly the right dimensions without having to pay hundreds of pounds for the punches (e.g. BNC sockets).

Galenbo · « **Reply #23 on:** February 29, 2016, 08:52:47 am »

Quote from: NilByMouth on February 29, 2016, 08:41:48 am

I printed feet for my vintage oscilloscope... I also printed a small electronics enclosure, which I can mod by adding holes of exactly the right dimensions without having to pay hundreds of pounds for the punches (e.g. BNC sockets).

Hmm, plastic replicas of an existing elastomer massproduct, and a thermoplastic electronics enclosure that gives a solution for who refuses to buy a drill.
I don't doubt you had fun with it, transferring the model in the software etcetera, but it still fully complies to the description I gave.

Try to produce a product outside the description, and you WILL be forced to get into that "Wow there grampa, don't get too cranky" range of computerised manufacuring methods.

Philfreeze · « **Reply #24 on:** February 29, 2016, 09:35:06 am »

Quote from: Galenbo on February 29, 2016, 08:52:47 am

Hmm, plastic replicas of an existing elastomer massproduct, and a thermoplastic electronics enclosure that gives a solution for who refuses to buy a drill.
I don't doubt you had fun with it, transferring the model in the software etcetera, but it still fully complies to the description I gave.

Try to produce a product outside the description, and you WILL be forced to get into that "Wow there grampa, don't get too cranky" range of computerised manufacuring methods.

Maybe the " thermoplastic electronics enclosure" (btw. this sounds really fancy) he wanted isn't produced in the same size. Should he buy a block of wood/plastic/alluminium and make the case from this block? This would take a lot of experience and equipment to do it right.

As for me, I printed multiple replacement parts for old gameboys, consoles and other electronic cases for free. This was done in a repair shop financed by the local university.
Everything worked perfect as long as you are able to use sandpaper and aceton to smooth things out really nicely.


EEVblog Main Site	EEVblog on Youtube	EEVblog on Twitter	EEVblog on Facebook	EEVblog on Odysee

Author Topic: 3D-Printing (Read 15982 times)

Share me