The 1xx are fine for lead.
I use Thermaltronics tips, M7CB226 (STTC-199) 1.5mm bent chisel, M7CH175H (no direct equiv, STTC-136 closest) 2.5mm 'power plus' chisel, M7CH250 (STTC-117) 5mm chisel, and an M8SB275 (STTC-826) 0.4mm bent conical. Accidentally ordered the hot version, but it's actually paid off (makes very, very fast work of quick reflows, and it's good for burning off enamel).
That 5mm chisel laughs at ground planes.