I tried some tests with PSU Shorter. The load resistor was 0R, so I tested the PSU to short circuit response until now. Blue trace = pin 3 of LM555, yellow trace = output of PSU.
1. Vout=1.75V
a. Iout=2.6A 97_001, 97_002
b. Iout=1.3A 97_006, 97_007
c. Iout= almost minimum 97_008, 97_009, 97_010
2. Vout=15.14V
a. Iout=2.6A 97_013
b. Iout=1.3A 97_014
c. Iout= almost minimum 97_015
3. Vout=30V
a. Iout=2.6A 97_022, 97_023, 97_024
b. Iout=1.3A 97_019, 97_020, 97_21
c. Iout= almost minimum 97_016, 97_017, 97_018
Please have a look and tell me if the results are good ?
The next step should be testing with different loads, what resistor values should I use ?