Author Topic: HANMATEK DOS1104 oscilloscope  (Read 861 times)

0 Members and 1 Guest are viewing this topic.

Offline motogeTopic starter

  • Contributor
  • Posts: 20
  • Country: jp
    • https://ameblo.jp/motogecg125fi/entry-12859020717.html
HANMATEK DOS1104 oscilloscope
« on: July 09, 2024, 11:54:47 pm »
Hello, I am a beginner to using oscilloscopes. Sorry for posting in incorrect English. I am using Google translation.

To the point :P :P :P
I am thinking of purchasing a HANMATEK DOS1104 4ch oscilloscope.

To measure three-phase AC generators, injector operation, ignition timing, etc. for motorcycle maintenance.

I am already using a 1ch oscilloscope, KKmoon DS0120M.

Do you have any recommendations for a low-cost 4ch oscilloscope?
ps I place importance on measuring three-phase AC generators。

thank you   From JAPAN


こんにちはオシロスコープを使用するのは初心者です。 
間違った英語で投稿するのはごめんなさい。

グーグルの翻訳を使用しています


 本題です :P :P :P
HANMATEK DOS1104の4ch のオシロスコープを購入しようとしています。

オートバイの整備のため 三相交流発電機、インジェクタ―動作、点火時期等測定するためです。

すでに1CHオシロ KKmoon DS0120Mは使っています

低価格の4Chオシロのおすすめは有りますか?
ps 三相交流発電機の測定は重視しています


 

Online jonpaul

  • Super Contributor
  • ***
  • Posts: 3616
  • Country: fr
  • Analog, magnetics, Power, HV, Audio, Cinema
    • IEEE Spectrum
Re: HANMATEK DOS1104 oscilloscope
« Reply #1 on: July 12, 2024, 06:54:50 am »
No need to proble a 3 phse gen, the alternators rectify to DC and use a solid state battery regulator.

Beware that didital scopes on vehicle ignotion are bound to fail due to HV pulses to 30 kV an dCM noise.

Use a simple xenon timing light or Get a professional ignition Analyzer.

Jon



An Internet Dinosaur...
 
The following users thanked this post: motoge

Offline motogeTopic starter

  • Contributor
  • Posts: 20
  • Country: jp
    • https://ameblo.jp/motogecg125fi/entry-12859020717.html
Re: HANMATEK DOS1104 oscilloscope
« Reply #2 on: July 17, 2024, 02:46:10 am »
 Thank you for your reply 

I would like to measure the condition of the generator coil of a three-phase AC generator and its waveform.




返答ありがとうございます

三相交流発電機のジェネレーターコイルの良否と波形を測定したいのです。
 

Offline motogeTopic starter

  • Contributor
  • Posts: 20
  • Country: jp
    • https://ameblo.jp/motogecg125fi/entry-12859020717.html
Re: HANMATEK DOS1104 oscilloscope
« Reply #3 on: July 17, 2024, 02:55:55 am »
  I want to use an oscilloscope to display whether the generator coil is burned or not.
 

Offline motogeTopic starter

  • Contributor
  • Posts: 20
  • Country: jp
    • https://ameblo.jp/motogecg125fi/entry-12859020717.html
Re: HANMATEK DOS1104 oscilloscope
« Reply #4 on: July 18, 2024, 11:06:53 pm »
Merci pour votre conseil

Qu’est-ce que le bruit DCM ?

Merci beaucoup pour votre conseil

merci
 

Offline rich t

  • Contributor
  • Posts: 49
  • Country: us
    • rtestardi's github pages site
Re: HANMATEK DOS1104 oscilloscope
« Reply #5 on: July 18, 2024, 11:55:31 pm »
I also use a scope on motorcycles...

You can see some of my experiences using a $18 scope I built here:

https://www.zx6r.com/threads/running-with-the-tank-off-ignition-injector-adventure.120654/?post_id=1915926#post-1915926

You can see injector pulses, stick coil pulses, and even the crankshaft sensor.

The scope goes to +/- 60 volts when using a x10 probe, which is plenty for automotive use, I believe, plenty for the 3-phase windings, etc.
 
The following users thanked this post: motoge

Offline motogeTopic starter

  • Contributor
  • Posts: 20
  • Country: jp
    • https://ameblo.jp/motogecg125fi/entry-12859020717.html
Re: HANMATEK DOS1104 oscilloscope
« Reply #6 on: July 19, 2024, 04:11:43 am »
 Thank you for very useful information  :)
And the 1CH oscilloscope unit looks very interesting.

I'll introduce it on the Japanese website too.


It's in Japanese but it's my website.
 https://ameblo.jp/motogecg125fi 

 Sometimes I try to install a 1-channel oscilloscope in my car.

  thank you for everything



 
The following users thanked this post: rich t


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf