can someone help with this issue
I'm trying to replace three components on a board, 2 capacitors and 1 resistor,
I am using a BSIDE tester to identify and test, I don't have much faith in this device for accurate readings
I removed the same components from an identical board,
the capacitors are of 0805 type with no markings, beige in colour,
when i measure the value i get 220nf esr 3.5oHms , if i turn the smd around and measure again i get 37pf with no esr reading. which reading is correct, and what value capacitor do i replace it with.
the resistor gives me different readings also unmarked and grey in colour, i get a reading between 0.38 on BSIDE and 0.5 oHms on a regular multi-tester, again do i replace with a 0.5 resistor. .
Thanks