Hello,
I am using an UltraZed EG SOM with IO Carrier board, and I am trying to configure Linux from MMC.
This board have 2 SD/MMC controllers: controller #0 is connected to MMC, while controller #1 is connected to SD card.
Xilinx's UG114 does not explains what is the correct PetaLinux configuration to boot from MMC, however petalinux-config allows to boot from SD card.
So I can boot from SD card, but I don't know how to configure u-boot from MMC.
Do someone has achieved such a configuration and can give an hint to solve this problem ?
Thanks,
g.