JTAG Programming on PLUTO PLUS or ADALM Pluto

[jemp]

Hello, All
As many of the Pluto User i have seen, there are many that obtained a bricked version after changing the firmware..
AD describes how to JTAG this bricked Pluto Plus, which will not come into DFU mode and NOT recognized by Windows anymore

So I bougt a Xilinx USB Platform II Cable and installed XilinxSDK 2017.4

I downloaded the Jtag firmware v0.29, to be found on the Github, with 4 files in it  run.tcl, ps7_init.tcl,  system_top.bit, u-boot.elf and installed these in ...sdk/scripts/xmd folder of Xilinx SDK

My pluto is seen by the SDK and when I enter run.tcl  I get this result..  ( see picture )

The ps7_init.tcl is not found..  strange because I put them beside the run.tcl file..

Can anyone explain this..  or where should this file be then ?

Tnx for any help

[glenenglish]

Suggest asking in the xilinx-AMD forums.