This is the real deal! As a matter of fact I know a couple (Ex-Siemens Engineer and his wife) who visited the Inductance Energy Corporation in Scottsdale/Arizona recently in August 2019!
They got to see the "Crystal Machine" and another "Earth Engine" running! They also were able to ask a lot of questions.
I am sure most of you engineers are familiar with the Halbach array? If not you might bring your knowledge up to speed:
https://en.wikipedia.org/wiki/Halbach_arrayThe company managed to magnetized the magnets in such a way, that the magnets have an inherent non-uniform asymetrical field.
Also they incorperated into the system is a flywheel! (900kg)
The used high quality ball bearings are form SKF (Germany).
https://www.skf.com/ch/de/index.htmlI guess the ball bearings must be replaced one day? But the magnets should work for a very long time without any loss of magnetization.
The system shall use an input energy four the control electronic of about 200W. Output max. 25kW
A smaller 7.5kW system is in work! A solar charge controller is used to charge 8 x 48V Batteris with a capacity of 60Ah = 23040Wh
Interesting is that currently two other companies have working magnet motors on sale:
https://gaia-energy.org/muammer-yildiz-willkommen-bei-gaia/Mr. Muammer Yildiz who showed his running magnet motor on the Geneva Inventor Exhebition in 2013:
He was afraid to let the motor run longer than about 15 minutes! Since it could happen that one of his 500 magnets could break off on block the system, due to vibrations!
According to the Gaia organisation that problem is solved, but in the recent test run in July 2019 the shaft, of the new 7.5kW magnetmotor and a coupled electric generator, broke just after 7 hours run time.
Here is my guess that they have not used a flexible coupling!? And again the vibration snapped the weakest part.
Also the company "Infinity SAV" based in South Korea has an interesting 10kW System to represent:
So I would think not all claims for magnetic motors are fake, it is probaly technology we are able now to invent and engineer, due to the fact that the science of magnetic fields
and properties of selden earth materials are better understood.
I just recently came accross this additional SolisWorks or Inventor Software for magnetic flux simulation:
So have fun discussing this topic further, I am looking forward for positive inputs or links to further dive into "Magnetism"!