Author Topic: What did you buy today? Post your latest purchase! (Read 3087318 times)

BFX · « **Reply #1075 on:** March 25, 2016, 07:46:33 pm »

Nice Agilent 4263B

Circuitous · « **Reply #1076 on:** March 25, 2016, 10:14:11 pm »

@BFX Nice LCR, that has great specs. Something like that is on my list, but they aren't cheap!

rx8pilot · « **Reply #1077 on:** March 25, 2016, 10:25:00 pm »

Quote from: BFX on March 25, 2016, 07:46:33 pm

Nice Agilent 4263B

I would love to have one of those on my bench. Nice.

Sent from my horrible mobile....

BFX · « **Reply #1078 on:** March 26, 2016, 07:45:43 am »

Quote from: Circuitous on March 25, 2016, 10:14:11 pm

@BFX Nice LCR, that has great specs. Something like that is on my list, but they aren't cheap!

Yes it's wasn't cheap but in this case price 950EUR was acceptable for me because it's looks in good condition.

Hobby73 · « **Reply #1079 on:** March 27, 2016, 03:13:11 am »

Picoscope 2205 25mhz USB oscilloscope. Purchased "pre-owned" on eBay at a nice discount.

Will use for checking power supplies used with low power DC microprocessors (Raspberry Pi) and microcontrollers (Arduino).

TiN · « **Reply #1080 on:** March 27, 2016, 03:15:59 am »

Agilent 4142B (HPAK version of Keithley 4200SCS), should be on it's way to me today or tomorrow

DiodomanX · « **Reply #1081 on:** March 27, 2016, 04:23:37 am »

I get it for close to nothing, and i will use the DASU as bench DMM, at least for a while.

Enviado desde mi XT1563 mediante Tapatalk

rx8pilot · « **Reply #1082 on:** March 27, 2016, 04:51:39 am »

HP 6624A 4 channel Linear PSU. $65. Ch 4 needs some help, but I think it will be an easy fix.

This is going in my growing automated QC system rack.

med6753 · « **Reply #1083 on:** March 27, 2016, 09:22:16 am »

Bought one of these then joined the Feel Tech thread over in Test Equipment.

Sbampato12 · « **Reply #1084 on:** March 28, 2016, 04:39:38 pm »

Bought this one, received today, for about US$50,00.

Sold as working, unfortunatelly arrived non working. Will talk with the seller.

McBryce · « **Reply #1085 on:** March 28, 2016, 08:03:50 pm »

It may just be a connector that has shaken loose in the post. I'd check it first before you give the seller a hard time.

McBryce.

Sbampato12 · « **Reply #1086 on:** March 29, 2016, 08:55:44 pm »

It was only the display intensity that was turned all the way down. But it is located in the rear of the equipment, so I took some time to realize.

Cubdriver · « **Reply #1087 on:** March 29, 2016, 10:48:32 pm »

Quote from: Sbampato12 on March 29, 2016, 08:55:44 pm

It was only the display intensity that was turned all the way down. But it is located in the rear of the equipment, so I took some time to realize.

Glad to hear it was something simple and easily corrected!

Doubtless a huge relief to you as well.

-Pat

AF6LJ · « **Reply #1088 on:** March 29, 2016, 10:48:56 pm »

Quote from: Sbampato12 on March 29, 2016, 08:55:44 pm

It was only the display intensity that was turned all the way down. But it is located in the rear of the equipment, so I took some time to realize.

Glad to hear you have it working now.

mojoe · « **Reply #1089 on:** March 30, 2016, 02:30:22 am »

Traded for an HP 3456A. Stuck buttons making the display read crazy. Before I started pressing buttons, the display looked normal, so there is hope that there isn't much wrong with this. I need to take apart the front panel to clean and repair all the switches. I'm suffering thorough the flu, so I don't feel like doing too much right now.

The 3456A is quite deep, so finding a place for it will be a challenge. However, it will be nice to have another 6.5 digit meter to compare with my 3457A which was recently calibrated.

VK5RC · « **Reply #1090 on:** March 30, 2016, 08:06:10 am »

re the buttons on a 3456A did you see the post about the stuck enter button ? https://www.eevblog.com/forum/repair/hp-5335a-non-working-enter-key/
There is also a link to a video and some other useful tips in that post.
I have pulled apart my 3456A to fix some non-detenting (but still working buttons) and found some of the metal strips floating around the inside and some missing, I have just bought some spring steel strip to try to repair, no luck so far with a bit of steel tape measure (too stiff) nor stiff plastic. I bought 0.05mm thick strip (the same thickness as the springs)

mojoe · « **Reply #1091 on:** March 30, 2016, 09:42:41 am »

Yes, I had bookmarked that thread for later. Thanks.

Sbampato12 · « **Reply #1092 on:** March 30, 2016, 02:17:29 pm »

Quote from: Cubdriver on March 29, 2016, 10:48:32 pm

Quote from: Sbampato12 on March 29, 2016, 08:55:44 pm
It was only the display intensity that was turned all the way down. But it is located in the rear of the equipment, so I took some time to realize.

Glad to hear it was something simple and easily corrected! Doubtless a huge relief to you as well.

-Pat

Quote from: AF6LJ on March 29, 2016, 10:48:56 pm

Quote from: Sbampato12 on March 29, 2016, 08:55:44 pm
It was only the display intensity that was turned all the way down. But it is located in the rear of the equipment, so I took some time to realize.

Glad to hear you have it working now.

Sure I felt a little dumb after that, but yes, a relief!

tnks!

Cubdriver · « **Reply #1093 on:** March 30, 2016, 03:17:37 pm »

Who would think to look for an intensity control on the rear panel? I doubt I would. (Well, NOW I might, but prior to reading this...)

-Pat

Sbampato12 · « **Reply #1094 on:** March 30, 2016, 05:28:38 pm »

Quote from: Cubdriver on March 30, 2016, 03:17:37 pm

Who would think to look for an intensity control on the rear panel? I doubt I would. (Well, NOW I might, but prior to reading this...)

-Pat

At least it isn't only me....

wkb · « **Reply #1095 on:** March 30, 2016, 05:50:38 pm »

Quote from: Sbampato12 on March 30, 2016, 05:28:38 pm

Quote from: Cubdriver on March 30, 2016, 03:17:37 pm
Who would think to look for an intensity control on the rear panel? I doubt I would. (Well, NOW I might, but prior to reading this...)

-Pat

At least it isn't only me....

Hehe... I had one of these LA, albeit the monochrome screen version. It had me confused on occasion.

BTW: have you paid close attention to how this 'color' CRT works..? <teaser question>

TheSteve · « **Reply #1096 on:** March 30, 2016, 06:45:12 pm »

Agilent 6553A 0-35 volt 0-15 amp supply for $70.00 shipped - powers on, maybe works, maybe doesn't. I will only know for sure when it arrives.

rx8pilot · « **Reply #1097 on:** March 30, 2016, 07:17:35 pm »

Quote from: TheSteve on March 30, 2016, 06:45:12 pm

Agilent 6553A 0-35 volt 0-15 amp supply for $60.00 shipped - powers on, maybe works, maybe doesn't. I will only know for sure when it arrives.

I have two of the 6653A's (don't know the difference, but they are nearly the same). Daily hard use, no issues. Love 'em. $60 shipped is about as good as it gets. I think mine were around $200-ish.

Cubdriver · « **Reply #1098 on:** March 31, 2016, 04:05:32 am »

Sweet! Nice to see that someone here got that power supply. I was planning to bid on it, but got caught up in life and was out and about when it ended.

-Pat

Vgkid · « **Reply #1099 on:** March 31, 2016, 04:57:08 am »

Nice, I still need to get back to troubleshooting mine. It is working(not correctly) but in pieces.


EEVblog Main Site	EEVblog on Youtube	EEVblog on Twitter	EEVblog on Facebook	EEVblog on Odysee

Author Topic: What did you buy today? Post your latest purchase! (Read 3087318 times)

Share me