WTB: 11x11 PGA socket

[devinatkin]

Looking to purchase a couple 11x11 pga sockets. Digikey is all out and I'm expecting a new piece of custom silicon to arrive in a couple of weeks. They'll be packaged in a PGA package. I don't have easy access to the lab at the university so I'm hoping to purchase a couple from somewhere. I cannot find a good source.
I need 84 pins, the outer 2 on all sides, then one corner and the 3 center ones on each side of the package

Any help sourcing these would be appreciated

[JXL]

https://www.ebay.com/itm/Lot-of-25-PGA-85S-85-pin-PGA-IC-CHIP-SOCKET-Free-S-H/153824819937?hash=item23d0ac7ae1:g:vlkAAOSwHSdcsLSa

Or it may be less expensive to get one of the > 11x11 full arrays and pull out the pins you don't need.

[andy3055]

https://www.ebay.com/itm/84-pin-Wire-Wrap-Tin-Machine-Screw-Contact-PGA-socket-12x12/193376076792?hash=item2d061cc3f8:g:64IAAOSwGFVeZpRv

[oPossum]

You can make any size PGA socket with these... https://www.digikey.com/product-detail/en/mill-max-manufacturing-corp/315-43-164-41-001000/ED4564-64-ND/1212142

[devinatkin]

You can make any size PGA socket with these... https://www.digikey.com/product-detail/en/mill-max-manufacturing-corp/315-43-164-41-001000/ED4564-64-ND/1212142

That didn't occur to me at all. Thank you so much for the suggestion. I'll likely end up going that route.