Author Topic: WTB: JBC soldering iron tips for the Advanced 2045 handpiece.  (Read 1394 times)

0 Members and 1 Guest are viewing this topic.

Offline likeabletomTopic starter

  • Newbie
  • Posts: 3
  • Country: nl
WTB: JBC soldering iron tips for the Advanced 2045 handpiece.
« on: December 10, 2020, 09:39:43 pm »
All,

I'm looking to buy cartridges that fit the JBC 2045 Handpiece, that connects to the Advanced series of soldering irons.  New or lin good condition.

This iron and accessories are now obsolete for a few years.

If you also have handpieces in good condition or other accessories for the Advanced series... i could be persuaded to part with some cash.

The cartridges are not the same as the current JBC offerings (three contact points with two black ring separators).  The Advanced series cartridges only have 2 contact points and one black ring separator on the shaft.  The partnumbers start with "2045 0xx"  where xxx is a number.

They look like:



These would be shipped to The Netherlands.

Thanks.
« Last Edit: December 10, 2020, 09:48:51 pm by likeabletom »
 

Offline KrudyZ

  • Frequent Contributor
  • **
  • Posts: 293
  • Country: us
Re: WTB: JBC soldering iron tips for the Advanced 2045 handpiece.
« Reply #1 on: December 13, 2020, 07:48:58 pm »
All,

I'm looking to buy cartridges that fit the JBC 2045 Handpiece, that connects to the Advanced series of soldering irons.  New or lin good condition.

This iron and accessories are now obsolete for a few years.

If you also have handpieces in good condition or other accessories for the Advanced series... i could be persuaded to part with some cash.

The cartridges are not the same as the current JBC offerings (three contact points with two black ring separators).  The Advanced series cartridges only have 2 contact points and one black ring separator on the shaft.  The partnumbers start with "2045 0xx"  where xxx is a number.

They look like:



These would be shipped to The Netherlands.

Thanks.
Your inbox is full, so I can't PM you...
 

Offline likeabletomTopic starter

  • Newbie
  • Posts: 3
  • Country: nl
Re: WTB: JBC soldering iron tips for the Advanced 2045 handpiece.
« Reply #2 on: December 13, 2020, 09:09:37 pm »
Fixed.  Had not realized that it was a number impractically close to zero.

5? that is barely enough to start a conversation!

L.
 

Offline tittu82

  • Newbie
  • Posts: 5
  • Country: it
Re: WTB: JBC soldering iron tips for the Advanced 2045 handpiece.
« Reply #3 on: January 27, 2021, 09:01:23 am »
Hi KrudyZ,

I wrote you PM because I am also interested to buy the JBC old cartridges, please get in touch with me too. You can also write me a mail to t i t t u 8 2 (At) g m a i l . c o m

THANKS!

All,

I'm looking to buy cartridges that fit the JBC 2045 Handpiece, that connects to the Advanced series of soldering irons.  New or lin good condition.

This iron and accessories are now obsolete for a few years.

If you also have handpieces in good condition or other accessories for the Advanced series... i could be persuaded to part with some cash.

The cartridges are not the same as the current JBC offerings (three contact points with two black ring separators).  The Advanced series cartridges only have 2 contact points and one black ring separator on the shaft.  The partnumbers start with "2045 0xx"  where xxx is a number.

They look like:



These would be shipped to The Netherlands.

Thanks.
Your inbox is full, so I can't PM you...
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf