Gentleman,
I now set the mail voltage to 240V (my mains are at 230VAC), the only thing is missing now is the 4A main fuse (was 8A in the 110V configuration).
2x6038A:
Both units the same problem: only the fan spins, the front panel does not startup.
6033A :
Surprise surprise, this sucker works.
CV Mode
@20V I measured 21,02V with my 34461A
@10V I measured 10,496V with my 34461A
CC Mode
@1A I measured 1,001A with my BK8500 DC Load
@2A I measured 2,008A with my BK8500 DC Load
@10A I measured 10,020A with my BK8500 DC Load
@20A I measured 20,079A with my BK8500 DC Load
I did not tested the GPIB here, but the rest was working. I think it needs some calibration.
PS: I miss when plastic was not used for the case, when I see some 2mm aluminium sheet and lots of screws for the case, it makes me happy.