Author Topic: WTD UK HP OPTION 060 Rear outputs for HP53131A  (Read 1567 times)

0 Members and 1 Guest are viewing this topic.

Offline G0WZBTopic starter

  • Regular Contributor
  • *
  • Posts: 119
  • Country: gb
WTD UK HP OPTION 060 Rear outputs for HP53131A
« on: March 05, 2016, 07:15:46 pm »
Hi All

Now I've got a HP53131A counter I'd like to get the HP OPTION 060 Rear output cable set, Does anyone have a set for sale or can point me in the right direction.  I can't seem to source any here in the UK.

I've also got the 3ghz option and if I'm reading service manual correctly the only way to get this to the rear is to physically move it from the front to the rear, Is that correct or is there a way to have it on front and rear at same time?

Thanks
Brian
G0WZB
The Devil made me do it!!
 

Offline G0WZBTopic starter

  • Regular Contributor
  • *
  • Posts: 119
  • Country: gb
Re: WTD UK HP OPTION 060 Rear outputs for HP53131A
« Reply #1 on: March 08, 2016, 07:16:10 pm »
These must be Rare lol
Any suggestions, I haveny looked inside but im assuming its just a basic rf cale with bnc and  a 2 wire solder job to the main board?  So i could use any of the ready made pig tals from ebay?
The Devil made me do it!!
 

Offline TheSteve

  • Supporter
  • ****
  • Posts: 3781
  • Country: ca
  • Living the Dream
Re: WTD UK HP OPTION 060 Rear outputs for HP53131A
« Reply #2 on: March 08, 2016, 10:55:17 pm »
Yes, they are just BNC pigtails that solder to the board not far from the front inputs.
VE7FM
 

Offline G0WZBTopic starter

  • Regular Contributor
  • *
  • Posts: 119
  • Country: gb
Re: WTD UK HP OPTION 060 Rear outputs for HP53131A
« Reply #3 on: March 09, 2016, 06:38:28 pm »
Many Thanks
Thought they were but just wanted to double check.
Best Regards
The Devil made me do it!!
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf