FS: LCR Cal Test PCB V5 (bare PCBs only)

[KungFuJosh]

Hi,

I have about 10 or so extra bare PCBs if anybody wants one. $25 for the PCB including shipping within the USA and payment via PayPal. PCB is good quality with ENIG plating.

This PCB is an excellent way to compare meters and monitor drift over time.

Here's the BOM for the LCR Cal Test V5 PCB.

More info here: https://www.eevblog.com/forum/testgear/lcr-cal-test-pcb/

PM me if interested.

Thanks,
Josh

[KungFuJosh]

In case that post wasn't clear, all the parts you need are from this project on Mouser: https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=6851743830

There are two 1000uF caps listed, one is a temporary replacement for the backordered one. The backordered one is 10V vs. 6.3V for the replacement.

Thanks,
Josh

[KungFuJosh]

I updated the price to keep things simple. I wanted $10 for the PCB, then it's about $10 for priority shipping, plus paypal fees, plus I have to box the thing up with bubble wrap, and then drive to the post office. So it's not worth my time for anything less than $25, and even that's not worth the time.

If anybody thinks that's too expensive, I have the BOM and Gerbers in the PCB thread, you can order your own boards from a PCB maker. That's fine with me too. 😉

Thanks,
Josh

[KungFuJosh]

For anybody else wondering:

Wah inductors are for Wah Wah guitar pedals. Typically 500mH to 700mH. You can google "Wah Inductor," or look for "Red Fasel inductor" if you want to populate that.

Thanks,
Josh