Hi all,
It looks like I have sold all of these, but if there are any left over I will update the post.
I have 146 76 (as of 25/4/19) of these 150mm x 80mm x 30mm enclosures available in bulk (minimum qty 5). They are all individually wrapped/sealed - brand new condition.
Features:- 150mm x 80mm x 30mm external dimensions
- Flame retardent ABS to UL- 94 VO with the base and lid moulded in dark gray with light gray end panels
- Ideally suited for instrumentation and telecommunication equipment from hand held to lab and desk top
- These cases have a four part design with a tongue and groove joint between the top and bottom of the case, and end panels of the same material.
- Designed to IP54 of IEC 529
- The top & bottom is lightly textured which gives a non scratch surface & maintains the high quality finish
- There are guide slots provided for vertical mounting of PCBs
- Bosses are provided for the horizontal mounting of PCBs (approx 55mm x 110mm screw centres)
- Four M-3 screws hold the case together (supplied)
- Includes four self adhesive rubber feet
- Individually sealed in plastic bags
These are the same as the Jaycar/Techbrands HB6034 enclosure, but have additionally been custom sprayed on the inside with a copper based paint to aid with EMC.
The end panels are a perfect size for BNC connectors, Banana jacks, USB, DB9 or DB25, DC barrel jack etc. This would be a nice enclosure for a small test instrument or similar.
Prices are :
5 for $20, 10 for $30, 20+ $2 each. Paypal is fine (buyer pays fees), bank deposit, or cash on pickup.
Pickup is from Birkdale 4159, or from my work address in Milton 4064, Brisbane, Australia. I can also post at buyers expense - I've found I can squeeze 20 units in a 5kg satchel (weighs about 2.5kg, but limited more by the volume). A 5kg Satchel is $17.65 + some packing material - call it $20 posted within Australia.