Hi ... Looking for electronics hobbyist(s) in the Manila, Philippines area who are experienced in and are willing to make simple pcb's for me.
I am an electronics hobbyist who creates designs with discrete electronics components, typically with logic gates, micro-controllers, led's, some buttons, LCD displays, audio-amplifiers, power supplies, etc ... I live in a high-rise condo and don't want to work with chemicals, fumes, etc ... and building rules do not allow me ... so I am looking for other hobbyists who etch/mill their own pcb's for their projects and are willing to do the same for my designs for a fee ... mostly single-sided although if you can do double-sided then better ... 1 or 2 copies only ... mostly with standard 0.1" spaced through-hole components with maybe an occasional 0805 or 0612 SMD ... pcb dimensions from credit card to maybe 6x8 inches max ... no need for plating-thru of via's / drilling / solder-mask / silkscreen / tinning ... turn-around time of week or more would be absolutely fine.
Preempting typical responses and suggestions ... no, I don't want to do this myself with toner / transfer / laser / pre-sensitized board / copper clad etc. ... no I don't want to buy a CNC/3D printer that can mill without chemicals and fumes ... yes, I use JLCPCB/PCBWAY/similar for my more complicated 4-layer boards but I just need a simple basic and no-frills single-layer board ... yes, I could send it to China but I won't ... yes, I use prototyping/vero boards and they perfectly suit my needs but I sometimes want a proper pcb made.
Anyone who is interested or who know where these kind of services are offered anywhere in the MM area? TYIA