Author Topic: FS (UK) Various bits of old HP/Tek/Marconi test gear,  (Read 1678 times)

0 Members and 1 Guest are viewing this topic.

Offline homewardTopic starter

  • Contributor
  • Posts: 11
  • Country: gb
FS (UK) Various bits of old HP/Tek/Marconi test gear,
« on: November 23, 2016, 12:03:21 pm »
Basically I acquired these a while ago, never really used them and now need the space, open to offers. Located just outside of Bristol, happy to post at buyers expense.

HP5310A Modulation Domain Analyzer-works.

HP4276A LCZ meter-needs work, is showing error codes.

Radford L.D.O series 2 valve sine and square sig gen. 5Hz-500kHz-works.

Marconi T.F2005R- Audio sig gen-Needs a power lead making up, I'm told it works but untested.

These are all old and fairly tatty, can take pictures if interested.

2x Tektronix 468. One works but with no digital storage, one doesn't work but digital storage board is apparently working. Was given the pair to fit the working storage board to the working scope. I did this but digital storage still didn't work so...who knows, probably easier to find the fault or just use it as an analog scope.

Racal-Dana 9300 RMS voltmeter-works but out of calibration.

2x Farnell TSV70 mk2 power supplies 30V/10A or 70V/5A, can be linked together-neither is working.
 

Offline nctnico

  • Super Contributor
  • ***
  • Posts: 27480
  • Country: nl
    • NCT Developments
Re: FS (UK) Various bits of old HP/Tek/Marconi test gear,
« Reply #1 on: November 23, 2016, 07:59:15 pm »
That HP4276A is tempting but my wife will batter me if I buy more equipment.
There are small lies, big lies and then there is what is on the screen of your oscilloscope.
 

Offline JoeD

  • Contributor
  • Posts: 26
  • Country: gb
Re: FS (UK) Various bits of old HP/Tek/Marconi test gear,
« Reply #2 on: November 23, 2016, 09:27:23 pm »
PM sent re the HP5310A

JoeD
You don't know 'til you try!
 

Offline m3ngc

  • Newbie
  • Posts: 1
  • Country: gb
Re: FS (UK) Various bits of old HP/Tek/Marconi test gear,
« Reply #3 on: November 27, 2016, 11:50:35 pm »
Hi, just getting back into ham radio and studying Intermediate.
Interested in the Tek scopes as a project, please pm/mail me details.
Thank you
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf