[FREE][EU] Whole Prusa MK3 Plastic Parts and more!

[sn4k3]

I'm giveaway all plastic parts from Prusa MK3.
I don't have a use for them and they are occupying some same.
Parts are:

All original from beta version less the LCD cover. (B3)
Printed by me parts to replace beta parts (R1) and some custom parts for better rigidity
It includes pi cases, pi cameras holder, reinforced parts, fan covers, holders, etc.
They are all PETG and ABS
You can assembly a whole prusa with these.
Hardware not included, but some leftoveres are there, like nuts in traps and some screws.

Beside if you want any custom part i can print at your request, or even if you need any hardware i have pretty much everything, from belts, idlers, motors etc, but not free! I also have original PSU if anyone want it (Without power panic)

The ad is free but postage are paid:
EDIT: After weight the parts they are much heavier than i think, 1.2KG, so postage is updated according
Europe: 11€ 18€
Wordwide: 19€ 28€
(Full tracked)

EXTRAS & Optional:

• Original V6 heatblock + original nozzle 0.4mm + sock (All used): 4€ [Heatbreak and heatsink not included]
• Original 0.6mm nozzle: 2€
• Original PSU (Without power panic): 25€
• Y and X belts: 2€
• PINDA v2 probe with cable repaired (May need another cut and rejoin cables at your work): 5€
• Original E and Y motors (No bondtech or idlers): 20€ each
• 16/20T idlers: 1€ each
• Tush Spool Holder (Original) with bearings: 2€ per pair
• 10 x LM8UU bearings: 10€ (3 used, others new)
• Note: Total Weight must be less than 2KG to be able to ship! Or EMS super expensive postage

Accepting PayPal with fees covered by buyer (Friend and Family mode)
No returns

[avogadro]

Id take it. I was looking at getting a 3d printer. I know nothing about them though. What harware parts would I need for it to get it to work and how much would it cost?

[sn4k3]

Id take it. I was looking at getting a 3d printer. I know nothing about them though. What else would I need for it to get it to work?

Well it depends on what you want get from me (extras). If you grab only the plastics, you need everything else. I don't recomend doing this if you don't have any back experience with printers or machines, it can be messy self-source every piece when "i don't know what i'm doing".
To better anwser your question, you can explore manual and see what you need: https://manual.prusa3d.com/c/Original_Prusa_i3_MK3_kit_assembly

This set have all plastic parts beside LCD cover, which print can survive without or i can print one for you.
You also can compare prices at thier store: https://shop.prusa3d.com/en/34-mk3-and-mk3s-printer-parts

[avogadro]

So if I get all of the extras from that you have listed I would have everything I need?

[sn4k3]

So if I get all of the extras from that you have listed I would have everything I need?

No, not even half. Please see the links i gave, they show everything you need, just read all steps.

[exe]

Id take it. I was looking at getting a 3d printer. I know nothing about them though. What harware parts would I need for it to get it to work and how much would it cost?

These plastic parts will only make your life much harder as sourcing required parts won't be easy or cheap. If you need a 3d printer just buy it. Ensure it has automatic bed leveling. Prusa mk3s is a good one, but requires quite a bit of patience to assemble (expect to spend the whole weekend). Also print quality may depend on how well you assembled it. A friend of mine ordered it pre-assembled and had to send it back due to quality issues. Then he ordered it as a kit and assembled himself. He said printing quality quite improved.

[sn4k3]

These plastic parts will only make your life much harder as sourcing required parts won't be easy or cheap. If you need a 3d printer just buy it. Ensure it has automatic bed leveling. Prusa mk3s is a good one, but requires quite a bit of patience to assemble (expect to spend the whole weekend). Also print quality may depend on how well you assembled it. A friend of mine ordered it pre-assembled and had to send it back due to quality issues. Then he ordered it as a kit and assembled himself. He said printing quality quite improved.

That's true.
Assembly kit is always better when people know what they are doing. Pre-assembled machines suffer from shipping impacts that may damage or descalibrate things. Anyway they recommend to recalibrate after turn ON. People who are looking for a plug and play machine may be disapointed with prusa's and most of others.