Author Topic: Free: components (Sydney, AU)  (Read 1445 times)

0 Members and 3 Guests are viewing this topic.

Offline KOHbTopic starter

  • Newbie
  • Posts: 3
  • Country: au
Free: components (Sydney, AU)
« on: January 18, 2021, 11:25:05 pm »
Hi.
We have a large q-ty of some new components looking for a good home:
See attached pictures below

Thru-hole Inductors 100UH 5.4A 46 MOHM 1410454 - q-ty about 300

Thru-hole potentiometer 10K LINEAR 20mm Flat SW Push RK0971114-5R4611 - q-ty about 400

Thru-hole electrolytic Low ESR capacitors 10uFx35V - q-ty waht you see on picture below (500-1500)

Thru-hole electrolytic capacitors 10uFx25V - 4boxes x 2000each

Thru-hole electrolytic capacitors 10uFx35V - 8boxes x 2000each
mg]

Free to good hands.

Pick-up from Warriweood, Sydney
« Last Edit: January 18, 2021, 11:30:48 pm by KOHb »
 

Online PlainName

  • Super Contributor
  • ***
  • Posts: 7076
  • Country: va
Re: Free: components (Sydney, AU)
« Reply #1 on: January 18, 2021, 11:38:53 pm »
That's very generous of you  :-+
 

Offline Brumby

  • Supporter
  • ****
  • Posts: 12360
  • Country: au
Re: Free: components (Sydney, AU)
« Reply #2 on: January 19, 2021, 09:47:26 am »
Tempting - but I don't really have a need.  Still, it's only a drive ... an hour each way ... but it's up in the Northern Beaches area - which has been a Covid hot-spot.  (Is that over, now?)

Besides, I'd get shot.

Then again, I'm sure I could squirrel it away somewhere ............






This may not end well.
 

Offline KOHbTopic starter

  • Newbie
  • Posts: 3
  • Country: au
Re: Free: components (Sydney, AU)
« Reply #3 on: January 19, 2021, 10:26:12 am »
It's over.

Hot spot is all Sydney now :-)

I can bring them to Beecroft if it is more convenient.
« Last Edit: January 19, 2021, 10:29:50 am by KOHb »
 

Offline austfox

  • Regular Contributor
  • *
  • Posts: 158
  • Country: au
Re: Free: components (Sydney, AU)
« Reply #4 on: January 19, 2021, 11:54:02 pm »
I’d be happy to take these off your hands.

Too much for me, but happy to split them up with Brumby and whoever else wants some. (Brumby: can drop them off next time I am in your area).

I think I have some spare reels of components here that I can also split up and add to the pot.
 

Offline KOHbTopic starter

  • Newbie
  • Posts: 3
  • Country: au
Re: Free: components (Sydney, AU)
« Reply #5 on: January 20, 2021, 07:53:28 am »
PM sent
 

Offline Brumby

  • Supporter
  • ****
  • Posts: 12360
  • Country: au
Re: Free: components (Sydney, AU)
« Reply #6 on: January 20, 2021, 12:23:26 pm »
You people are going to get me into so much trouble........

I’d be happy to take these off your hands.

Too much for me, but happy to split them up with Brumby and whoever else wants some. (Brumby: can drop them off next time I am in your area).

I think I have some spare reels of components here that I can also split up and add to the pot.


 :-+

(I'm dead)
 

Offline Brumby

  • Supporter
  • ****
  • Posts: 12360
  • Country: au
Re: Free: components (Sydney, AU)
« Reply #7 on: February 24, 2021, 09:37:19 am »
Care packaged dropped off today.  Thank you.

The (4) boxes of bandolier radial caps fit perfectly in my shelving.  (Just have to find somewhere for the displaced occupants.)  Same can be said for two trays of some very nice ALPS pots - not sure what I'll do with 139 of them, but...  ;D  Also, what to do with a few dozen nice, chunky inductors.

Also included were a couple of breadboards, breadboard jumpers and some SMD components as well as a few more radial caps and some battery holders.

All in all, a very welcome addition to my collection ... and delivered to my door!  I cannot thank austfox enough!
 

Offline Brumby

  • Supporter
  • ****
  • Posts: 12360
  • Country: au
Re: Free: components (Sydney, AU)
« Reply #8 on: February 24, 2021, 09:39:34 am »

 :-+

(I'm dead)

The jury's still out .... I have to absorb the new arrivals into the existing space.  Time limits apply.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf