WANTED - Sony Tektronix 308 Data Analyzer Front COVER

[David D]

I have a really nice Sony Tektronix 308 Data Analyzer that needs the front snap on protective cover. The part number listed in the manual is 016-0408-00. @Bud recently sold one with the cover. I hope he doesn't mind me borrowing one of his posted pics as an example!

[kripton2035]

this simple rectangular shape should be easy to design using some cad program, and then 3d print it ?

[coromonadalix]

since you have a tektronix name under sony  it may or should be possible  to find it at TEK ??  normally they have a printed number on them ?

try to find your dimensions

or similar search like tektronix scope dust cover ....

[coromonadalix]

i did write it .... it was an example

[David D]

Thanks for the suggestions. The 308 is much smaller than it may appear in pictures. The front bezel measures about 7-1/2" wide by 4" tall. I've searched on the internet and of course eBay, but no luck so far.

[David D]

I'm still looking for one of these if anybody has one or knows where I can buy one. I keep looking on eBay, but none have popped up. 

[coromonadalix]

3d print ?

[ZGoode]

Hi David,
So if I understand correctly, you have 1 of this part and need another?  I could help with designing a 3D printable part for you since I have access to a Keyence metrology grade scanner that I have been using for a lot of reverse engineering.  This looks like a simple part so I would be happy to do it for free, you just pay shipping for the part both ways.

[David D]

3d print ?

Hi David,
So if I understand correctly, you have 1 of this part and need another?  I could help with designing a 3D printable part for you since I have access to a Keyence metrology grade scanner that I have been using for a lot of reverse engineering.  This looks like a simple part so I would be happy to do it for free, you just pay shipping for the part both ways.

That's a very kind offer, but I don't have one to copy  . I'd really like to find an original cover as it would be simpler and no worries about it fitting.