Inmet load sold, pending funds.75 ohm termination sold, pending funds.50/75 ohm feedthroughs sold.New addition to the list... three bias returns and a balanced mixer.I recently bought a pile of Tektronix and ham radio gear that included several boxes of connectors, terminations, and test gear. I will be listing gear here that I can't use, or already have, before I put it on ebay. Some things will be tested, others will not have more than a power on check, so please read the listing carefully to be sure you know what you are buying and its condition.
Starting small:
(1)
Meca 401-1FS 50 ohm load, N conn. DC-6GHz. Tested to 2.0GHz. $12 each plus shipping.
(1) Inmet 3070M-071 50 ohm load, N conn. DC-18GHz. Tested to 2.0GHz. $15 plus shipping.(3)
Tektronix 2X 50 ohm attenuator, BNC conn. 011-0069-02. Lettering is worn. Tested to 500Mhz. $23 each plus shipping.
(2) Tektronix 50/75 ohm feedthrough, BNC conn. 011-0057-01. Tested to 500MHz. $10 each plus shipping. (1) Tektronix 75 ohm termination, BNC conn. 011-0103-02. Tested to 500Mhz. $12 plus shipping.(1)
Narda 10-33 GHz power divider, SMA conn. 4328-2. Functionally tested to 2GHz. $100 plus shipping.
(3)
Tektronix bias return. sma conn. 119-1164-00. For the Tek 492, 494 SA. Center to center ~50 ohms. $20 each plus shipping.
Everything above was tested using a modest directional coupler and a Siglent SA and appears to be within original spec but I can't guarantee it, and my bench isn't calibrated for such things, so YMMV.
(1) W+J 2-24GHz mixer, SMA conn. M52DC-1. For the Tek 2784 SA. Did a basic test with an SA, tracking generator and 1GHz sig gen. Appears to be working ( appropriate mixing products at the output) but test is well below the operating range, so here's a special deal: buy it with a right of return for $175, buy it without one for $100. PM me here or find me on qrz.com; my call sign is K7WXW.
Edit: added bias return, mixer.