Author Topic: Video Blog 133 and 134 outcome  (Read 3850 times)

0 Members and 1 Guest are viewing this topic.

Offline SirDanTopic starter

  • Contributor
  • Posts: 29
  • Country: ca
  • Spell binding guitar solos
    • Voltage Divider CA
Video Blog 133 and 134 outcome
« on: December 21, 2010, 08:43:03 am »
Hello Dave,

What was the outcome of the resistor precision problem? Did digikey come good for the resistors? Was there any compensation for labor to replace the components?

I am assuming Maxim replaced the 1-wire parts, was there any offer of compensation for the labor involved to re and re the components on thousands of circuit boards?

I am just curious as what to expect if this ever happens to us.

Love the video blogs!

Best Regards,
Dan Pattison
www.remotemonitoringsystems.ca
 

Offline EEVblog

  • Administrator
  • *****
  • Posts: 38720
  • Country: au
    • EEVblog
Re: Video Blog 133 and 134 outcome
« Reply #1 on: December 21, 2010, 11:49:11 am »
Yes, Digikey replaced the resistors and want me to send a uCurrent unit to Bourns. Buggered if I know why.
No other compensation.

Yes, Maxim replaced the parts, and I am led to believe a small amount of compensation was offered.

If it ever happens to you then expect to have to eat the deal, that's what usually happens.

Dave.
 

Offline allanw

  • Frequent Contributor
  • **
  • Posts: 343
    • Electronoblog
Re: Video Blog 133 and 134 outcome
« Reply #2 on: December 21, 2010, 07:09:56 pm »
Really? I'd be pretty pissed off if I bought a reel of 3k parts at $1 each and couldn't get them replaced if they were defective.
 

Offline Neilm

  • Super Contributor
  • ***
  • Posts: 1559
  • Country: gb
Re: Video Blog 133 and 134 outcome
« Reply #3 on: December 21, 2010, 07:17:48 pm »
This happen at the company I work for.

We got a load of processors from the supplier to find they were programmed with code. Worse, the security bit was set so we couldn't reprogramme it.

It stopped production for 4 WEEKs while everyone argued.

Neil
Two things are infinite: the universe and human stupidity; and I'm not sure about the the universe. - Albert Einstein
Tesla referral code https://ts.la/neil53539
 

Offline quantumfall

  • Regular Contributor
  • *
  • Posts: 149
Re: Video Blog 133 and 134 outcome
« Reply #4 on: December 21, 2010, 11:43:11 pm »
Yes, Digikey replaced the resistors and want me to send a uCurrent unit to Bourns. Buggered if I know why.
No other compensation.

Yes, Maxim replaced the parts, and I am led to believe a small amount of compensation was offered.

If it ever happens to you then expect to have to eat the deal, that's what usually happens.

Dave.

"want me to send a uCurrent unit to Bourns"

Piddle Off send it to me, I will tell them it works fine with the write parts, what a swiz, _ Fine one ucurrent for complaining.
 

Offline EEVblog

  • Administrator
  • *****
  • Posts: 38720
  • Country: au
    • EEVblog
Re: Video Blog 133 and 134 outcome
« Reply #5 on: December 22, 2010, 06:33:40 am »
Really? I'd be pretty pissed off if I bought a reel of 3k parts at $1 each and couldn't get them replaced if they were defective.

Sorry, what I mean by you have to eat the deal, is you have usually have to eat the consequences of inadvertently using those parts.
The company is of course always under the requirement to replace defective or incorrect parts under law (in most countries?), but they not under legal obligation to reimburse you any costs associated with what happened if you used those parts. To do that usually requires you to spend vast sums to sue them.

Dave.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf